|
|
02-10-2009, 06:21 PM
Originally Posted by zj95maxx
March 21,2009
is that when your balls drop...
Originally Posted by greengc4x4
02-11-2009, 03:42 AM
Winner winner chicken dinneris that when your balls drop...
05-21-2009, 11:27 PM
Got sye orderd today finally.
Also built passager side headlight and bumper, and mounted rear shocks.
Its been forever. i cant wait
05-22-2009, 01:38 PM
05-22-2009, 01:44 PM
Lookin' good!
I really oughta update my build thread sometime....I guess after I finish the 9"
05-22-2009, 03:58 PM
could be the angle, but it looks like your front tracbar is pulled over a little to the driver side
05-22-2009, 04:10 PM
Brett, what picture are you looking at? I can barely see the track bar in any of those pictures...
05-22-2009, 04:11 PM
the bottom picture, just looks like the body is pulled to the right side of the picture a bit
05-22-2009, 05:02 PM
Oh gotcha....yes agreed. I was looking for something with the actual track bar itself
05-22-2009, 09:44 PM
that look GREAT man!!!
Now get it out on the trail!!!
05-23-2009, 07:09 AM
Nice work! I like how the headlights turned out.
05-27-2009, 02:05 PM
Tore apart d44 yet again today and replaced the Inner seals and shaft u-joints.
U-joints were completly dry and siezing up
Hopefully i wont have to tear it down again for a while, what a pita.
Sye/DS will be here thursday
Nah its all center.. its toed out quite a bit tho.. still need to allign it before test run
Yeah im super happy with my angles, they are almost exact
IM TRYIN!
Thanks smookems.
05-27-2009, 06:23 PM
Is it done yet??
06-05-2009, 12:44 AM
Homebrew front driveshaft
Poser
Get the conversion u-joint tomarrow for the rear ds, 1310-1350.
ALMOST DONE!
06-12-2009, 02:13 AM
Its ALIVE! Been driving it around, drives great!
Had some wandering issues but with some adjustments its driving like a dream on the highway. and thats with unbalanced TSL's.
Really not that tall as some of the pics make it look. In the pics the rear was 1.5-2" taller but Ive got it sitting level now.
Also got headlights all wired up.
Still to do before first trip:
Weld 14b (Wanted to get it driving before messing with driveline to eliminate and excessive noises)
Bump stops/ Limit straps (Need ASAP)
Reinstall skids
06-12-2009, 02:18 AM
Pics still make it look like front axle is not centered but I swear it is! lol
06-12-2009, 07:14 AM
Makes it look like your tires are point different directions.
Haha looks great though, nice work!
06-12-2009, 09:42 AM
Homebrew front driveshaft
Did you just sleeve over the outside of the stock driveshaft tubing?
06-12-2009, 12:17 PM
yes. i sleaved it, welded the ends and plug welded it. eventually i would like to just retube the whole thing but this works for now.
06-12-2009, 01:39 PM
Looks frieking dope!
06-12-2009, 05:50 PM
thx man
06-13-2009, 01:17 AM
Do you know who Chris Bassett is?
06-13-2009, 01:45 PM
doesnt rig a bell off the top of head. He from tucson?
06-13-2009, 02:14 PM
The headlights totally remind me of a commander here lmao
06-14-2009, 12:53 AM
No from California. Old school name and rig. Yours and his are the same color, have the same stance and the same front fender trimming.
Coming to GSSW? http://www.mallcrawlin.com/forum//sh...ad.php?t=19821
We can go run Brutal and Smasher Canyon.
| « Previous Thread | Next Thread » |
| Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |
