|
|
01-20-2009, 12:50 PM
Yep, that's mine on 35x12.5x15 MTR's and 15x8 3.75"BS wheels and stock width axles.
Let Chad cut it for you, he cut David's WJ and it looks nice.
09-04-2009, 11:04 PM
great artile!
where are pics of davids wj?
the bumpers I have seen for the wj are to bulky. TR bumper is nice though! Looks good on yours john. has anyone seen a DIY article on bumpers? I like the fiberglass unit from Iceland Offroad but it is FIBERGLASS. how tough can that be? LOL
thanks all
09-05-2009, 01:27 AM
Originally Posted by Asphalt Assault
do some searching. all of your questions have been answered already in other threads on the forum.
11-17-2011, 12:36 AM
More cutting.
11-17-2011, 12:38 AM
Why stop?
11-17-2011, 12:39 AM
.
They fit. I had a chance to take them on a trail a few weeks ago.
No, they don't run in the rear at all, weird angle in the picture. They rub just a tad on the front, under the front fender. More cutting.
I don't like the increased sidewall flex, weird feeling when off camber, so I will go to a 17" wheel next summer and get some MTR Kevlars.
This was a free swap 35's for 37's on 15" rims, so I couldn't pass up the chance to see if they would fit. Besides, it gave me a chance to cut more stuff on the Jeep.
Last edited by JohnBoulderCO; 11-17-2011 at 12:51 AM.
11-17-2011, 02:28 AM
Did I see you on 8th Ave last night? Following a two-toned XJ.
11-17-2011, 01:45 PM
Nope, not me.
11-20-2011, 10:48 PM
How did the unibody fix go?
11-21-2011, 05:12 PM
There is a lot of bad ass going on there.
11-21-2011, 11:00 PM
I adjusted the doors, to minimized the gap, drank some beer and said, free bigger tires would make it all better.
I'm still going to take it to a frame shop now that all the CO trails are snowed in and see what can be done.
11-21-2011, 11:01 PM
Thanks. When in doubt, just cut more.
03-20-2014, 12:05 AM
Bump to make it easier to move the thread to the build thread forum. Should be some interesting updates coming soon!
03-20-2014, 12:44 AM
I cut the doors tonight, love my grinder.
03-20-2014, 01:11 AM
Front Door
Rear Door
Last edited by JohnBoulderCO; 03-20-2014 at 01:40 AM.
03-20-2014, 01:13 AM
Damn, these smart phones work! Cutting doors to fold up. Need to make room for more cutting to follow.
03-20-2014, 12:06 PM
So you're rolling the lip up and then going to do what?!?
03-20-2014, 02:23 PM
Seam sealer is your friend.
03-20-2014, 02:41 PM
Weld flat to bottom of all 4 doors. Cutting out rocker panels next.
03-20-2014, 11:07 PM
Sub'd
03-23-2014, 10:23 AM
Bottom of front door welded flat. I cleaned it up a bit, then hit it with the black rattle can.
Last edited by JohnBoulderCO; 03-23-2014 at 10:37 AM.
03-23-2014, 10:28 AM
Rear door repair
03-23-2014, 10:30 AM
One side done
03-23-2014, 10:32 AM
Both sides done
03-23-2014, 10:35 AM
Inspired by AgitatedPancake (Greg) and fluxcap (Tyler), the rockers are coming out next weekend and new sliders welded in.
Anyone need some slightly used WJ sliders?
| « Previous Thread | Next Thread » |
| Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |
