|
|
03-09-2008, 02:53 PM
Installed Kevins Track bar conversion and a new steering stabilizer. my buddy had this RC one in his garage that he never used so i gave it a shot. right now i like it better then my OME but it all depends how long it will last.
I hate NE weather/rust.
Clayton long arms going on this monday.
03-10-2008, 04:24 PM
Just got back from Claytons shop in CT. install took about 3 hours and the guys there were very friendly and down to earth. i also got to check out a jk they were working on. unfortunatly on the way home i got pulled over by a state cop that insisted i needed mud flaps :roll:
difference from short arms to long arms are night and day.
03-10-2008, 05:30 PM
you dont need no fuckin mud flaps, your vehicle is registered as a station wagon. tell that cop to fuck off
Originally Posted by Four Play
03-10-2008, 05:50 PM
is that for real?
03-10-2008, 07:14 PM
niiiiiiiice, i like the JK too
03-11-2008, 09:22 AM
wouldnt that be the second time the cops have hassled you about your tires.
ooh and lets see some more pics.
03-11-2008, 11:35 AM
yeah... ZJ's are regesterd as station wagons... In most states station wagons dont need mud flaps
03-11-2008, 06:51 PM
did some maintenance work on the jeep today.
got some cheapo truck bedliner in a rattle can to do my fenders and unibody rails
did the rear diff fluid
got the wrong gasket so i hadda wrap up for a trip back to cap
03-11-2008, 10:13 PM
I was gonna say how in the hell did they install longarms in only 3 hours but I looked again and saw you only got the front setup. So when are you getting the rears also?
Last week I was out of town and rode around in a buddies one ton dodge cummins for a week and it rides ok... but when I got back home and hopped back in my ZJ I forgot how smooth it rode
Originally Posted by Krash80
03-11-2008, 11:37 PM
im waiting on the rear untill i get a nice axle under my jeep. i also wanted to look into gears first. we'll see
03-11-2008, 11:48 PM
How does it ride compared to before with just the front done? Also what did you pay just for the front of claytons set up if you don't mind my asking? Looks good by the way too
03-12-2008, 12:35 PM
the front end of the jeep just floats over bumps and dips in the road, but you can still feel the ass end get tossed around a bit and take the bumps pretty hard.
it was around 870 for the arms, 90 an hour for installation, 25 for parts (grinders, paint, etc) and 50 for tax. overall it was around 1200
03-12-2008, 06:05 PM
wow! get some buds to help next time
03-28-2008, 10:30 PM
03-29-2008, 08:02 PM
BLING BLING!
03-29-2008, 08:42 PM
Ow D! Fawker!
White out? Poser
03-29-2008, 10:47 PM
Straight up your jeep went from badass to old geezer in 2.5.
03-29-2008, 11:46 PM
im going back to steelies on tueday.
got a good deal on those wheels from the townfair through clearence overstock sale and free services through wheel and tire package. after subtracting the free alignment and future alignment, free lifetime balancing, free flat repair, and free mounting and balancing, i only spent around 150 bucks for the 4 ar-23 wheels. also, the free services arent lost even if i switch wheels.
im driving down to my buddys shop and swapping my steelies back in and selling the ar-23's to make up for tire cost. i never really intended to keep the wheels.
if anyones interested in some 15x10 ar23's with like 50 miles on them, pm me.
03-30-2008, 01:20 AM
Give them some gas station $2 sunglasses with them too
04-01-2008, 09:24 PM
old steelies are back on.
i really need some longer shocks... here are some pics at my buddys garage. he works at an acura stealership.
04-01-2008, 10:07 PM
Fuck everyone. I liek my AR-23's. They look fine, I would leave the black out though. Bitch ass fuckers around here put 2 of mine with the black out and 2 with the white so I have to take it back. Fuckers.
04-01-2008, 10:44 PM
That thing must have looked out of place at an Acura shop.
04-01-2008, 10:58 PM
Black out would almost make up for rims that give you a sunburn J - ALMOST
04-19-2008, 05:19 PM
newly painted fenders and cladding:
| « Previous Thread | Next Thread » |
| Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |
