|
Well after tapping my Stearing box i figured i would do a little write-up on where to tap the box. There seams to be a huge amount of write-ups on how to tap, but non go into great detail on where. With the exception of the few that are like " tap along this seam approximatly below this mark." or "Tap in the middle of this area."
So here ya go. All holes should be tapped with a 1/4" NPT tapered tap. You will need to purchase two taps. One to start the threading and another you will have to cut down for a bottoming tap.
The RED hole is powered when turning left. The BLUE hole is powered when turning right.
Rock.
awn.
cant wait to have hydro assist
Here's my blurb on this:
http://www.offroadtecharchive.com/in...w_Steering_Box
just incorporated your pic...
Last edited by Kraqa; 11-08-2005 at 04:56 PM.
« Previous Thread | Next Thread » |
Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |