Thread: Totorhome bus build

Results 1 to 6 of 6
  1. #1 Totorhome bus build 
    Member dubj's Avatar
    Join Date
    Aug 2012
    Location
    denver, colorado
    Posts
    72
    Rep Power
    26
    Well. Its official, Im "that guy"
    I had been looking into new tow rig options and was nearly committed to buying a 6.0 powerstroke. But then Tyler gave me a call, about one of his clients getting ready to sell their old fleet of school busses. Now when it comes to commercial vehicles, Ive always thought that if their cheap, theres a reason. Cause who sells something that is making them money for cheap. But these werent old clapped out busses, the distric had simlpy bought an entire new fleet. And with busses, theres a lot of supply, but not much demand. so their cheap. Well I did some research and talked with the girlfriend and she was on board. So we drove out and did a test drive, decided on a price and waited for the distric to call saying they were decomissioned and ready to sell.

    So I'm now the somewhat proud own of a 1992 71 passenger 38' blue bird bus.

    The plan is cut the rear wall off and move it to about the rear axle and flatbed the rest, much like this.

    Then turn the front into a "full time" living area, we wont actually move into the bus, but it will be homely. It will have a Sower behind the driver seat that will have a door or something that will have a cassette toilet in it, so you will get in the shower and open the door and pull the toilet into the shower for use. then next to that will be the sink. I have a 46 gallon fresh water tank coming and will use a 55 gal drum as grey water for now. No black water. It will have two water pumps, one for the cold water side, one for the hot water heater loop. we will have cabinets going about another 5' to the rear. after that it will be an RV style bed/booth table combo. the passenger side will have a tall linen closet and then be cabinets with a counter going over two 110v mini fridges. The fridges will be ran off the smallest inverter i can get away with that will be wired with a relay off the fridges thermostat to only turn on when the fridges temp reaches the set thermostat temp. I will be running golf cart batteries for power and eventually add a small generator. will probably use a propane camp stove for cooking for now. I have picked out an indirect fired diesel heater that will be plumbed about and 1/8 from the bottom of the fuel tank for heating.

    here she is

    backed into the shop while we dynomatted the floor





    the seats ripped out


    junking everything at the scrap yard. got some very weird looks


    The weight while gutted. a lot lighter than i expected for a 31k gvwr


    5/8"plywood over the fatmat


    cheap peel and stick vinyl. you can also see how I took the rear stubby seat and modified it to work in the front. these seats are temporary


    planning on installing the shower this weekend.

    and look! one with a zj onboard!
    Reply With Quote  
     

  2. #2 Re: Totorhome bus build 
    Senior Member MallCrawlin Supporter
    Grand Slam West Planner
    JohnBoulderCO's Avatar
    Join Date
    Jun 2004
    Location
    Colorado
    Posts
    2,761
    Rep Power
    92
    Damn that’s a project! So when will the WJ be on the back of the “bus”?
    WJ, 4.7, Clayton's Front, Double Triangulated Rear, 231HD, HP44, 8.8, ARBs, TR Bumpers, Hydro Assist, 35's, Cage
    Lambo Doors - tweaked unibody
    http://www.mallcrawlin.com/forum/showthread.php?t=8532
    Reply With Quote  
     

  3. #3 Re: Totorhome bus build 
    Member dubj's Avatar
    Join Date
    Aug 2012
    Location
    denver, colorado
    Posts
    72
    Rep Power
    26
    Quote Originally Posted by JohnBoulderCO View Post
    Damn that’s a project! So when will the WJ be on the back of the “bus”?
    well I think ive already made this lie like 3 times, sooo. By GSW?
    Reply With Quote  
     

  4. #4 Re: Totorhome bus build 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    931
    Rep Power
    76
    Quote Originally Posted by dubj View Post
    well I think ive already made this lie like 3 times, sooo. By GSW?
    3?!!? I've heard it more than that!

    Awesome bus!
    95 ZJ, Lift, dents, and noise.
    Reply With Quote  
     

  5. #5 Re: Totorhome bus build 
    Member
    Join Date
    Feb 2016
    Location
    E-town PA
    Posts
    89
    Rep Power
    12
    Great score! We just had a mid length flat nose bus at the boss had bought with intentions to ship it to Haiti until he found out shipping it cost more than he paid for the bus. It was an ex-US Marshall's bus and had bars over all the windows, though the cage had been cut out. We sold to someone looking to turn it into a motorhome. The Cummins engine was probably worth more out of the bus than in the bus. IIRC he paid around $2500 for it at auction.

    Sent from my SAMSUNG-SM-G930A using Tapatalk
    Reply With Quote  
     

  6. #6 Re: Totorhome bus build 
    Member dubj's Avatar
    Join Date
    Aug 2012
    Location
    denver, colorado
    Posts
    72
    Rep Power
    26
    Update, got the shower mostly installed. still need to get material for the roof and put the curtain on (will be getting a door, but it came with the curtain). then plumb and vent it. Unfortunately the insert we bought is supposed to have all the walls put together and then be put on the base. and we don't have the height for that, so the rear wall is installed wrongly. Gonna use caulk and secure it more, results are not great, but oh well. the walls are attached with L brackets and wood/self tapping screws. need to figure out what im doing with the hole were the light was. And the water tank came on today! So plumbing should begin soon.


    Reply With Quote  
     

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •