Thread: 2015 Swap meet

Results 1 to 17 of 17
  1. #1 2015 Swap meet 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    902
    Rep Power
    72
    What do you have for sale? What are you looking for?

    I have a set of Dana 35 Yukon heavy duty shafts for drums. They are the over sized ones that don't work with disks. $200 for both. Not many ZJs need these but I have a set.
    95 ZJ, Lift, dents, and noise.
    Reply With Quote  
     

  2. #2 Re: 2015 Swap meet 
    Senior Member Lifetime Supporter
    Grand Slam West Planner
    jsteves's Avatar
    Join Date
    Jul 2004
    Location
    Fort Fun
    Posts
    2,314
    Rep Power
    85
    I have a WJ D30 long side shaft, used but in good shape. $30
    04 Dub -- Longarms, JK44, 9" ARB's etc.
    68 Super Wagoneer - Resto Project
    93 ZJ: longarms, 231D, 35's, 44/Hi 9", ARB's, etc. -- Sold
    Reply With Quote  
     

  3. #3 Re: 2015 Swap meet 
    Senior Member MallCrawlin Supporter
    Grand Slam West Planner
    fpkites's Avatar
    Join Date
    Dec 2006
    Location
    Denver, CO
    Posts
    2,505
    Rep Power
    83
    Stock ZJ steering, probably ok for trail spares
    Currie ZJ steering, better shape than the stock, but Dave and Pam beat on the set before I bought it from Dave

    I may have given Dave $75 for the Currie, but I don't remember. Stock, just make an offer. I can't use either anymore since I went 1-ton steering.
    Jim Karlin
    Project Big Red Jeep
    96 ZJ, 4" inch lift (Claytons, Teraflex coils), 33" Kumho MT KL71s, Aussie in the rear
    A bunch of KOR stuff
    Taurus e-fan swap (DC Controls box)

    GSW 2010 Pics
    Reply With Quote  
     

  4. #4 Re: 2015 Swap meet 
    Senior Member MallCrawlin Supporter
    Grand Slam West Planner
    Stealth Crawler ZJ's Avatar
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    736
    Rep Power
    49
    Looking for a case of ZJ gremlin repellent (electrical specific) willing to pay decent if you have a full case as I will need as much as I can get!
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  5. #5 Re: 2015 Swap meet 
    Senior Member MallCrawlin Supporter
    Grand Slam West Planner
    PassRunnerZJ's Avatar
    Join Date
    Aug 2004
    Location
    Grand Junction, Colorado, United States
    Posts
    1,418
    Rep Power
    70
    5.5" IRO springs as I lowered my ZJ when swapping bodies. Also Doetsch Tech 8000 shocks for the 5.5" lift F&R for stock setting axle brackets. Less than 7k miles, 2 seasons on them. They have a great spring rate just taller than I want on 33x10.5x15 tires w/stock rims.

    Shocks - $100.00 for the set of four
    Springs - $210.00 for the front and rear
    Last edited by PassRunnerZJ; 05-11-2015 at 12:57 AM.
    '98 ZJ, 33s and an XJ drivetrain, Iron Rock Offroad 4.5" Critical Path suspension lift, D44i, custom rear bumper w/tire carrier, KOR ZJ Radiator Support
    '95 ZJ - after 208k and the fun gear swapped to the '98, now it gets setup to sell
    '01 WJ, T/C skid, K&N replacement - wife's DD
    '04 Honda Civic - my DD

    Grand Slam West Event Registration - Moab, UT - 20th Annual - June 6-10, 2017 - Five (5) days of wheeling Moab, in a row!
    Please Support Our Sponsors for your build needs!
    Reply With Quote  
     

  6. #6 Re: 2015 Swap meet 
    Member dubj's Avatar
    Join Date
    Aug 2012
    Location
    denver, colorado
    Posts
    66
    Rep Power
    22
    I've got a d44a open carrier and kevins old bumper (wj)
    Reply With Quote  
     

  7. #7 Re: 2015 Swap meet 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    902
    Rep Power
    72
    I have a pair of http://www.summitracing.com/parts/bsn-f4be56249h5]Bilstein 5100[/url] shocks as well. 29.70 in. Extended/17.91 in. Collapsed Lengths, Eyelet/Eyelet. $100 pair.
    95 ZJ, Lift, dents, and noise.
    Reply With Quote  
     

  8. #8 Re: 2015 Swap meet 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    902
    Rep Power
    72
    1995 Lifted Grand Cherokee Ltd. ZJ parting out

    Just about everything is available, I will group parts together with discounted prices and feel free to make an offer, prices based off of Denver Craigslist and too much coffee. Pictures available on request, I will try to post some soon.

    4.0 stroker, 4.7L Accurate power kit, Hesco high flow head, 24lb/hr 4 hole injectors, 99+ intake, 62mm bored throttle body, Airaid intake spacer, Turbo City intake with AFE air filter, Mike Leech header (dented from driveshaft) new cap and rotor and all accessories. Only 4k miles. Engine runs but needs tuning. $1,000

    42RE transmission built to handle the stroker $500

    NP231 with SYE $300

    High pinion Dana 30 front with 4.10s open hub to hub $200

    Ford 8.8 rear 31 spline from an Explorer with 4.10s, Aussie locker and setup for triangulated 4-link (Clayton style) Spare shafts available. $500

    4” Custom longarm suspension. 4” springs, arms are 2” 1/4” wall round tube, front arms are y-link with Johnny joints on body side and rubber bushing on the axle side, upper arm is a JKS arm with c-bracket to mount to axle. Rear arms are Johnny Joints and Crawler joints one on each end, each arm has a left and right hand so it is an easy and infinite adjustment. You will need to figure out body mounts as I am not grinding mine off. Claytons should work. $600

    Tom woods rear driveshaft fits 4.0/42RE/231 with sye to 8.8 $100

    Front u-joint driveshaft SOLD

    Aluminum radiator $100

    Kevin's trackbar bracket with JKS adjustable trackbar. $150

    Kevin’s radiator support, sight bend and one bolt is cross threaded $50

    Waggy steering box. SPF

    Good battery, 2 years old, 3 year warranty $30

    Black exterior, fenders are trimmed, doors are fine, driver door and hatch are flat black were white and then spray painted. Hood is silver. $50 each

    Head lights and tail lights $20

    Power side view mirrors driver $30 passenger $15 mirror is cracked.

    Ford Taurus two speed fan. SPF

    Interior is tan with tan leather no rips, smooth seats not the puffy ones. $100 for all the seats.

    WJ knuckle swap parts, knuckles, calipers, and a tie rod. $150

    Spidertrax wheel adapters 5 on 4.5 to 5 on 5, with spare tire adapter. $50

    Stock gas tank skid. $50

    Addco swaybar. This is an over sized version from the normal bar. I will include homemade discos for the dog bone ends on the bar. $100

    Stock t-case skid with some welded in reinforcements. $20

    Other interior items ask or offer, that’s too much to list.
    I will remove or mark items as sold or spoken for.
    Last edited by K2; 05-18-2015 at 10:50 PM.
    95 ZJ, Lift, dents, and noise.
    Reply With Quote  
     

  9. #9 Re: 2015 Swap meet 
    Senior Member MallCrawlin Vendor
    Join Date
    Dec 2007
    Location
    Colorado
    Posts
    949
    Rep Power
    78
    Would this be an okay place to offer to bring any vendor parts you guys might want? Save a ton on shipping costs. I'll already be bringing a few things for the raffle too.
    Neil R.

    93 318 ZJ, HP30, 8.8, 4.56, 35"s, tube.

    Quote Originally Posted by SirFuego View Post
    WTF? A unibody won? Did they build a mall at the finish line or something?


    Funniest thread on MC
    Reply With Quote  
     

  10. #10 Re: 2015 Swap meet 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    902
    Rep Power
    72
    Put a link to your site in your sig, and your steering box brace thread. It is hard to find you.
    95 ZJ, Lift, dents, and noise.
    Reply With Quote  
     

  11. #11 Re: 2015 Swap meet 
    Senior Member Grand Slam West Planner Ted_Z's Avatar
    Join Date
    May 2007
    Location
    Denver, CO
    Posts
    1,010
    Rep Power
    55
    I have a Kevin's Track bar kit, a 20 CO2 tank with regulator and hose (empty) and a pair of machined flat top dana 44 knuckles. Oh and I also have a positive attitude.
    -Ted Z
    '97 Grand Cherokee Laredo w/ stuff
    '02 Grand Cherokee Limited w/ less stuff
    Quote Originally Posted by Cody View Post
    everytime someone makes a bumper with a stinger, God kills 6 baby Koala's.
    Reply With Quote  
     

  12. #12 Re: 2015 Swap meet 
    Senior Member MallCrawlin Supporter
    Grand Slam West Planner
    Stealth Crawler ZJ's Avatar
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    736
    Rep Power
    49
    Quote Originally Posted by FortCollinsZJ View Post
    Would this be an okay place to offer to bring any vendor parts you guys might want? Save a ton on shipping costs. I'll already be bringing a few things for the raffle too.
    So does this mean you want to be a GSW sponsor?
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  13. #13 Re: 2015 Swap meet 
    Junior Member
    Join Date
    May 2015
    Location
    Oregon
    Posts
    4
    Rep Power
    0
    Hey Ted how you want for that positive attitude 😃


    Sent from my iPhone using Tapatalk
    Reply With Quote  
     

  14. #14 Re: 2015 Swap meet 
    Senior Member Grand Slam West Planner Ted_Z's Avatar
    Join Date
    May 2007
    Location
    Denver, CO
    Posts
    1,010
    Rep Power
    55
    Priceless
    -Ted Z
    '97 Grand Cherokee Laredo w/ stuff
    '02 Grand Cherokee Limited w/ less stuff
    Quote Originally Posted by Cody View Post
    everytime someone makes a bumper with a stinger, God kills 6 baby Koala's.
    Reply With Quote  
     

  15. #15 Re: 2015 Swap meet 
    Senior Member MallCrawlin Supporter
    Grand Slam West Planner
    Stealth Crawler ZJ's Avatar
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    736
    Rep Power
    49
    Does anyone happen to have a left (drivers) side taillight for a 02' WJ that the would like to sell?
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  16. #16 Re: 2015 Swap meet 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    902
    Rep Power
    72
    I called a shop I need to go to tomorrow and he said $35.
    95 ZJ, Lift, dents, and noise.
    Reply With Quote  
     

  17. #17 Re: 2015 Swap meet 
    Senior Member MallCrawlin Supporter
    Grand Slam West Planner
    Stealth Crawler ZJ's Avatar
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    736
    Rep Power
    49
    That would be awesome if you could!
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

Thread Information
Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •