Thread: GSW 2014 Parts Swap

Page 1 of 2 12 LastLast
Results 1 to 25 of 26
  1. #1 GSW 2014 Parts Swap 
    Senior Member Lifetime Supporter
    Grand Slam West Planner
    jsteves's Avatar
    Join Date
    Jul 2004
    Location
    Fort Fun
    Posts
    2,388
    Rep Power
    111
    I'll get this year's thread rolling!

    I have a set of Mopar D30 OPEN shafts as spares. Original to my Jeep. Good boots and joints. 130k miles on 'em. $75

    2 sets of Mopar D44 OPEN rear shafts as spares. One pair is original to my Jeep, the other was pulled at the yard. $75 per pair.

    JKS rear Adj. control arms. Less than 8kmiles on them, never off road so no scrapes, scratches or rust. I believe the will work for TJ, ZJ or WJ. They were in my WJ and I will include the JKS spacers for WJ use (really a stack of grand 8 washers). $200

    Adj. front upper control Arms. Were on my Jeep when I purchased it. I believe they are from Rocky Road. TJ, ZJ, XJ, or WJ. $90

    Fixed front lower WJ control arms from Rocky Road. Need new poly bushings. Were on my Jeep when purchased. $25

    Rocky Road WJ A Arm spacer. On my Jeep when purchased. $45

    Maybe some other stuff laying around....
    04 Dub -- Longarms, JK44, 9" ARB's etc.
    68 Super Wagoneer - Resto Project
    93 ZJ: longarms, 231D, 35's, 44/Hi 9", ARB's, etc. -- Sold
    Reply With Quote  
     

  2. #2 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner
    Join Date
    Aug 2004
    Posts
    1,892
    Rep Power
    102
    Might want to also post on Facebook
    Reply With Quote  
     

  3. #3 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    964
    Rep Power
    98
    Anybody need 4.10s for dana 30/35? Or Yukon shafts for 35?

    Also who would be interested in a Waeco/Dometic fridge cf-18? I have a line on 2 and need only 1.
    Last edited by K2; 05-29-2014 at 04:13 PM.
    02 WJ, Lift, dents, noise and smoke.
    Reply With Quote  
     

  4. #4 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    814
    Rep Power
    75
    Quote Originally Posted by K2 View Post
    Also who would be interested in a Waeco/Dometic fridge cf-18? I have a line on 2 and need only 1.
    How much?


    Build it. Lock it. Crawl it.
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  5. #5 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    964
    Rep Power
    98
    $180, you would be 2nd in line. I actually have 3 fridges right now, I have 2 18s and a 35 I am trying to figure out which one I keep. Justin has dibs on what's left.
    02 WJ, Lift, dents, noise and smoke.
    Reply With Quote  
     

  6. #6 Re: GSW 2014 Parts Swap 
    Senior Member
    Join Date
    Dec 2007
    Location
    SL,UT
    Posts
    2,189
    Rep Power
    157
    Anyone need a ZJ? I'll bring the black one is someone wants to purchase it
    Quote Originally Posted by IndyZJ View Post
    The password is newbgasm.
    www.crawlerready.com
    "For The Truly Addicted!"

    Reply With Quote  
     

  7. #7 GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    814
    Rep Power
    75
    I have a couple axles up for grabs!

    Ford 8.8 4:10 LSD
    Trussed and ready for triangulated uppers
    Ballistic fab diff cover
    W/disc brakes
    $450 obo


    96' zj hd 44a
    3:73 gears open
    Unbolted stock!
    W/disc brakes
    $250


    Also have 4:10 gears for a hp d30
    $50

    Zj steering box brace
    $25

    Zj steering box
    $50 obo

    and a few other d30 parts


    Build it. Lock it. Crawl it.
    Last edited by Stealth Crawler ZJ; 06-01-2014 at 10:40 PM.
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  8. #8 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner Mtn WJ's Avatar
    Join Date
    Jun 2004
    Location
    Highlands Ranch, Colorado
    Posts
    1,741
    Rep Power
    99
    Feeler = We just swapped in a D44A into Kyle"s WJ and therefore have a WJ D35 with 3.73s for sale. Complete and in good shape minus the brakes. Let em know if hter is interest and I can bring it to GSW.
    Ask not what your country can do for you; but what can you do for your country. JFK Jan 20th, 1961

    TnT Customs Long Arms, 33" BFG KM2s, Magnum 9k winch, Ready Welder, Custom HP 30/30 front with ARB, Currie HP 9 rear with Detroit
    Reply With Quote  
     

  9. #9 Re: GSW 2014 Parts Swap 
    Member
    Join Date
    Jan 2008
    Location
    Basalt, CO
    Posts
    109
    Rep Power
    67
    I have a WJ Dana 30 w/ 4.56s, diff cover (can't remember the brand), and JKS tie rod. Needs new everything from BJs, to tie rod ends to possible breaks. $200 obo
    Brian
    99 WJ - 6" lift w/ Claytons, 231, 4.56, 44 Front, Locked 44a, Custom bumpers, 35 KM2s, Spyderlocks
    Reply With Quote  
     

  10. #10 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner Ted_Z's Avatar
    Join Date
    May 2007
    Location
    Denver, CO
    Posts
    1,096
    Rep Power
    80
    I have the following available:

    ZJ Rubicon Express 3.5" springs, F & R (have sagged about an inch)
    ZJ/XJ Rubicon Express HD front track bar and frame side mount (new axle side bushing)
    Ford 8.8 axle shafts, perfect for trail spares
    Dana 44 TrueTrac, for 3.92 and numerically higher gears. was used in front application. (this is the LS with the helical gears, no clutches to wear out)
    Single Poly engine mount insert, can be used on 96-98 trans mounts (which is why I have only one).
    Various 231 and 242 shifter bezels
    ZJ specific 231 selector switch
    Kevins/JKS ZJ front track bar, needs new bushings. Also the frame side mount is home made.

    I'm looking for:
    35's
    17X8 wheels with a 5x5.5" bolt pattern
    -Ted Z
    '97 Grand Cherokee Laredo w/ stuff
    '02 Grand Cherokee Limited w/ less stuff
    Quote Originally Posted by Cody View Post
    everytime someone makes a bumper with a stinger, God kills 6 baby Koala's.
    Reply With Quote  
     

  11. #11 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner Mtn WJ's Avatar
    Join Date
    Jun 2004
    Location
    Highlands Ranch, Colorado
    Posts
    1,741
    Rep Power
    99
    Looking for a busted WJ CV shaft. I want to use the outer only portion of along with a spare unit bearing hub for a trail fix. I will take a standard broken Dana 30 outer but prefer a WJ type so the tone ring works with my speedometer.
    Ask not what your country can do for you; but what can you do for your country. JFK Jan 20th, 1961

    TnT Customs Long Arms, 33" BFG KM2s, Magnum 9k winch, Ready Welder, Custom HP 30/30 front with ARB, Currie HP 9 rear with Detroit
    Reply With Quote  
     

  12. #12 Re: GSW 2014 Parts Swap 
    Senior Member Lifetime Supporter
    Grand Slam West Planner
    jsteves's Avatar
    Join Date
    Jul 2004
    Location
    Fort Fun
    Posts
    2,388
    Rep Power
    111
    Might have something better you. I pulled the fake "stub" shaft from a 2wd WJ as a trail spare but don't need it any longer since I went to the 44 Front. Also have a D30 cover and spare set of Dana 30 WJ shafts if anyone is interested.


    Sent from my iPhone using Tapatalk
    04 Dub -- Longarms, JK44, 9" ARB's etc.
    68 Super Wagoneer - Resto Project
    93 ZJ: longarms, 231D, 35's, 44/Hi 9", ARB's, etc. -- Sold
    Reply With Quote  
     

  13. #13 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner Mtn WJ's Avatar
    Join Date
    Jun 2004
    Location
    Highlands Ranch, Colorado
    Posts
    1,741
    Rep Power
    99
    Justin,

    The 2wd drive stub shaft is absolutely perfect and what I was really looking for. Thanks.

    We have spare shafts for Kyle's Jeep. Mine is 30 splines with a locker so I am just looking for an emergency spare in case I break a shaft.
    Ask not what your country can do for you; but what can you do for your country. JFK Jan 20th, 1961

    TnT Customs Long Arms, 33" BFG KM2s, Magnum 9k winch, Ready Welder, Custom HP 30/30 front with ARB, Currie HP 9 rear with Detroit
    Reply With Quote  
     

  14. #14 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner Ted_Z's Avatar
    Join Date
    May 2007
    Location
    Denver, CO
    Posts
    1,096
    Rep Power
    80
    Quote Originally Posted by Ted_Z View Post
    I have the following available:

    ZJ Rubicon Express 3.5" springs, F & R (have sagged about an inch)
    ZJ/XJ Rubicon Express HD front track bar and frame side mount (new axle side bushing)
    Ford 8.8 axle shafts, perfect for trail spares
    Dana 44 TrueTrac, for 3.92 and numerically higher gears. was used in front application. (this is the LS with the helical gears, no clutches to wear out)
    Single Poly engine mount insert, can be used on 96-98 trans mounts (which is why I have only one).
    Various 231 and 242 shifter bezels
    ZJ specific 231 selector switch
    Kevins/JKS ZJ front track bar, needs new bushings. Also the frame side mount is home made.
    I forgot to mention that that I'd be willing to give this stuff away if it can find a good home, or add it to the pizza in the park give-away pool.
    -Ted Z
    '97 Grand Cherokee Laredo w/ stuff
    '02 Grand Cherokee Limited w/ less stuff
    Quote Originally Posted by Cody View Post
    everytime someone makes a bumper with a stinger, God kills 6 baby Koala's.
    Reply With Quote  
     

  15. #15 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner K2's Avatar
    Join Date
    Jun 2004
    Posts
    964
    Rep Power
    98
    I will give you something for those 8.8 shafts and 231 selector bezel.
    02 WJ, Lift, dents, noise and smoke.
    Reply With Quote  
     

  16. #16 GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner JohnBoulderCO's Avatar
    Join Date
    Jun 2004
    Location
    Colorado
    Posts
    2,813
    Rep Power
    116
    I have a stock Ford 8.8 Explorer driver's side shaft, if someone else needs an axle shaft.
    Last edited by JohnBoulderCO; 06-04-2014 at 05:25 PM.
    WJ, 4.7, Clayton's Front, Double Triangulated Rear, 231HD, HP44, 8.8, ARBs, TR Bumpers, Hydro Assist, 35's, Cage
    Lambo Doors - tweaked unibody
    http://www.mallcrawlin.com/forum/showthread.php?t=8532
    Reply With Quote  
     

  17. #17 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    814
    Rep Power
    75
    Quote Originally Posted by Ted_Z View Post

    Ford 8.8 axle shafts, perfect for trail spares!
    Are you sure about giving them up? They have come in handy!


    Build it. Lock it. Crawl it.
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  18. #18 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner Ted_Z's Avatar
    Join Date
    May 2007
    Location
    Denver, CO
    Posts
    1,096
    Rep Power
    80
    Quote Originally Posted by Stealth Crawler ZJ View Post
    Are you sure about giving them up? They have come in handy!
    I pick up a set of alloys. These were my trail spares.
    -Ted Z
    '97 Grand Cherokee Laredo w/ stuff
    '02 Grand Cherokee Limited w/ less stuff
    Quote Originally Posted by Cody View Post
    everytime someone makes a bumper with a stinger, God kills 6 baby Koala's.
    Reply With Quote  
     

  19. #19 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner Mtn WJ's Avatar
    Join Date
    Jun 2004
    Location
    Highlands Ranch, Colorado
    Posts
    1,741
    Rep Power
    99
    You have both sides Ted? Seems like you used one of them already.
    Ask not what your country can do for you; but what can you do for your country. JFK Jan 20th, 1961

    TnT Customs Long Arms, 33" BFG KM2s, Magnum 9k winch, Ready Welder, Custom HP 30/30 front with ARB, Currie HP 9 rear with Detroit
    Reply With Quote  
     

  20. #20 GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    814
    Rep Power
    75
    I also have a mile marker winch 8000lb elec winch brand new still in the box!

    $300 obo


    Build it. Lock it. Crawl it.
    Last edited by Stealth Crawler ZJ; 06-09-2014 at 09:01 PM.
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  21. #21 Re: GSW 2014 Parts Swap 
    Senior Member Lifetime Supporter
    Grand Slam West Planner
    jsteves's Avatar
    Join Date
    Jul 2004
    Location
    Fort Fun
    Posts
    2,388
    Rep Power
    111
    I have at least 2 gallons of unopened green prestone. Free for anyone who could use it.


    Sent from my iPhone using Tapatalk
    04 Dub -- Longarms, JK44, 9" ARB's etc.
    68 Super Wagoneer - Resto Project
    93 ZJ: longarms, 231D, 35's, 44/Hi 9", ARB's, etc. -- Sold
    Reply With Quote  
     

  22. #22 Re: GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    814
    Rep Power
    75
    If you could bring it I can use it!


    Build it. Lock it. Crawl it.
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  23. #23 GSW 2014 Parts Swap 
    Senior Member Lifetime Supporter
    Grand Slam West Planner
    jsteves's Avatar
    Join Date
    Jul 2004
    Location
    Fort Fun
    Posts
    2,388
    Rep Power
    111
    Sure thing. Assuming you are still good for those shafts?


    Sent from my iPhone using Tapatalk
    04 Dub -- Longarms, JK44, 9" ARB's etc.
    68 Super Wagoneer - Resto Project
    93 ZJ: longarms, 231D, 35's, 44/Hi 9", ARB's, etc. -- Sold
    Reply With Quote  
     

  24. #24 GSW 2014 Parts Swap 
    Senior Member Grand Slam West Planner
    Join Date
    Dec 2008
    Location
    Fruita, CO
    Posts
    814
    Rep Power
    75
    You bet!


    Build it. Lock it. Crawl it.
    "ZJ's were designed with the intention to take 1 really good hit, and fold up. As long as the occupants walked away, it was a success. In the wheeling world, we expect our vehicles to take multiple really good hits, drive out of it, and run the obstacle again!"
    Reply With Quote  
     

  25. #25 Re: GSW 2014 Parts Swap 
    Senior Member Lifetime Supporter
    Grand Slam West Planner
    jsteves's Avatar
    Join Date
    Jul 2004
    Location
    Fort Fun
    Posts
    2,388
    Rep Power
    111
    Great!


    Sent from my iPhone using Tapatalk
    04 Dub -- Longarms, JK44, 9" ARB's etc.
    68 Super Wagoneer - Resto Project
    93 ZJ: longarms, 231D, 35's, 44/Hi 9", ARB's, etc. -- Sold
    Reply With Quote  
     

Page 1 of 2 12 LastLast
Thread Information
Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •