|
I found what was supposed to be a grand clutch/brake pedal assy from a grand at a parts yard in CO. It doesnt really look like it would fit just taking a look under the dash and the tag on the part just says cherokee. I looked online and could only find a couple pics that showed pics of a zj mount. I can't find a part # on the mount either unless its hidden by the pedals. Anyone know for sure by looking at this pic.
Oh ya that is a tj mount on the right. And zj? Mount on left.
Guess title should say manual trans swappers since the pedals are not limited on number of gears. Also dont know why the whole pic is not showing.
From what I have read in the past the early XJ pedal assembly works in the ZJ .
Ya i have seen some say they just swap pedal from an xj and some say the swap ir real easy with little modding. Then seen a couple say it requires a lot of mods to make it fit. Guess it depends on who is doing the mods or year models maybe. Guess ill get out there in the morn and do some more indepth checking.
I just bought it from a yard as a grand clutch pedal box/mount for a '94 grand. I was trying to find out if that is what i have. Guess i need to go out there and try to put it in. Either way i'm not sending it back, ill make it work or have a spare.
that is a set of xj pedals. best way to figure out if they fit is take out your stock zj pedals and compare the brackets, then cut and shape to fit. Thats what I did
Ya i found this a couple days ago just didn't post it
http://crd4x4parts.com/pedal-assembl...cherokees.html
Don't bother looking for a zj. They do not have one. They do have a master slave unit and clutch parts, just not the clutch pedal and bracket.
Here is a pic of the top. I prolly could separate the 2 boxes and use the xj brake box for a zj clutch. Just have to mod the pedal some.
look at the pics on this page of my JF thread, they show how I modified the xj bracket. You will also need to weld on a longer bolt in front(firewall side) of the pin that the master cylinder rod attaches to in order to get the angle/rod throw length right.
http://www.jeepforum.com/forum/f197/.../index213.html
Well if i can get someone to get me some measurements, i want to build my own bracket and pedal all together.
« Previous Thread | Next Thread » |
Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |