WJ Rear Axle Truss & Skid (d44a or d35)

[quadratokn]

Valhalla Fabrication is excited to announce the NEW WJ Rear Axle Truss & Skid. Finally, the WJ Grand Cherokee has a good truss in production! This fits both the Dana 44a and 35. Some have even made the skid work on a ZJ! This heavy duty truss is designed to be used with your factory A-arm OR a 4-link suspension.

---

Features Include:

- Your choice between an A-arm version and a 4-link version. A-arm version can easily be converted to 4-link even after installation.
- 1/4" steel, skid uses 3/16" steel
- CNC laser cut to tight tolerances
- CNC bent
- Reinforced with interlocking 1/4" gussets for strength and easy assembly
- Raises the A-arm 2" so you save money on an A-arm spacer
- Hardware included for the A-arm
- May save you from replacing wheel bearings that wear faster due to excess flex from the steel tubes pressed into the aluminum center section
- Welding required

---

Truss: $200 with FREE shipping
Skid: $115 with FREE shipping

Website: valhallafab.com
Email Address: valhallafab@gmail.com
Phone Number: 847-595-1134
Facebook Page: facebook.com/ValhallaFab

CLICK HERE FOR PICTURES

[USFORCES]

PMed, I want one for sure..
Cook County IL? If so cool I'm in Winnebago county so shipping shouldn't be too much

That should work good with my adj. A arm.

[quadratokn]

PMed, I want one for sure..
Cook County IL? If so cool I'm in Winnebago county so shipping shouldn't be too much

That should work good with my adj. A arm.

PM replied. Your aftermarket control arm will bolt up to the truss for sure.

Thanks!

[quadratokn]

4 link

[Mtn WJ]

Nice to see them ready, I will be ordering one soon for my Son's DubJ.

[USFORCES]

I sent you another PM on 04-10 if you could would you answer it.

Thanks
USFORCES

[quadratokn]

All PM's replied. Thanks!

[quadratokn]

This truss also works on the d35.

[speedmontzj]

Would it be possible to use this on a zj if you took the a-arm mount off and mounted it to a 1/4" plate diff cover instead? I lost my clayton truss when i sold my tons, and i have to get one anyway.

[quadratokn]

Would it be possible to use this on a zj if you took the a-arm mount off and mounted it to a 1/4" plate diff cover instead? I lost my clayton truss when i sold my tons, and i have to get one anyway.

I bet it would probably work!

[DaveS]

Still making these?

[quadratokn]

Still making these?

Definitely, we have several on the shelf.

[lostagain]

How much to ship a skid usually?

[quadratokn]

Just a skid could run about $14.

[lostagain]

Cool I just might be placing an order soon. I have a zj and am just looking to protect that aluminum housing

[quadratokn]

This would be what you need!

[lostagain]

Now just gotta quite spending money on the XJ long enough to get thus for the ZJ

[quadratokn]

Well we have a 10% off sale going on this weekend. Take advantage!

[lostagain]

That's a good enough reason.

[quadratokn]

FREE SHIPPING this month!

[LSRGreg]

I'm in the market to beef up my 44a and am running Clayton's long arm kit. You guys still making these? I know the thread is a little old. Also, does the truss and skid come welded, or just in separate pieces?

[quadratokn]

I'm in the market to beef up my 44a and am running Clayton's long arm kit. You guys still making these? I know the thread is a little old. Also, does the truss and skid come welded, or just in separate pieces?

WOW my post/response to this disappeared. I'll respond again so everyone knows...

We will ALWAYS be selling this truss and skid.


And they do not come pre-welded.

[BigDaveZJ]

WOW my post/response to this disappeared. I'll respond again so everyone knows...

We will ALWAYS be selling this truss and skid.


And they do not come pre-welded.

None of your posts were deleted by anyone here, and there was never a response posted to LSRGreg's question. However, if you would like to continue to use the Vendor Forum to advertise your products I would ask that you renew your vendor subscription.