|
|
04-02-2013, 09:09 PM
It's that time of year again so post up what you got(or will have) for sale!
So far this is what I have.
D35 rear axle 3:73 gears limited slip $75 obo
Stock coils x4 $40 obo
2.5 lift springs x4 $50 obo
LP d30 axle housing $40 obo
Zj front receiver bumper $125 obo(as seen in my build tread)
Jks adjustable rear track bar $40 obo
d-30 wheel bearings 2x 20$ea. OBO
d-30 cv style axle shafts drv/pass 25$ ea.
...
I will add more as I think of it!
Last edited by Stealth Crawler ZJ; 05-18-2013 at 07:31 PM.
04-09-2013, 07:41 PM
Explorer Ford 8.8 axle shaft, driver's side, 31 spline, wheel studs installed, in great shape. $30
This is my straight spare, not the bent one.
Last edited by JohnBoulderCO; 05-29-2013 at 03:19 PM. Reason: Price Change
05-10-2013, 08:48 PM
I have most of a Rock Krawler 3.5" suspension. $50 (arms)
I am willing to seperate parts.
Rear adjustable uppers and lowers
Front adjustable lowers
I strongly recomend new joints.
3.5" springs $100
unknown brand adjustable track bar for 2-4" lift. $40
If I can get them there I have 2 Hancook Dynapro MT RT03 tires about 2/3 worn 265/70R17 load range E $120
1 well worn 236/70R17 hwy tire for a spare...when deflated, it fits in WJ stock spare location holding the lid up about an inch. $20
1 16" stock aloy wj wheel with 245/75R16 goodyear tire-Brand new $80
As I think of more I will add it.
05-17-2013, 04:56 PM
WJ 44a for sale if anyone is interested. Its out of a quadra-drive so its varilock with 3.73 and stock diff cover. 100k on it.
WJ d30 varilock 3.73 for sale. needs pinion seal and probably an upper CA bushing and a new TRE. 100k on it.
WJ TC drop kit from IRO.
WJ rear lower control arms, fixed length 18 5/8" eye to eye from IRO.
WJ IRO adjustable trackbar.
All parts are coming off my 04 WJ with 100k and 6.5" lift. PM with questions.
Make offer on all parts
05-21-2013, 05:13 PM
I have a set of 5 JK Moab rubicon wheels. Make offer!
01' WJ Limited, 33's, LA's etc.... JF 09' GCOTY
05-21-2013, 10:57 PM
Still have these brand new adjustable rear upper and lower shorty control arms with johnnie joints. RRO brand. Cost me $350, I'll take $150. I also have my old front bumper...
[IMG][/IMG]
05-22-2013, 05:24 PM
What's the lug pattern 5x5? Do you have pic's unmounted?Originally Posted by 311WJ
Rim size 16x8?
Last edited by Stealth Crawler ZJ; 05-22-2013 at 05:27 PM.
05-22-2013, 05:41 PM
I dont know how much 311wj gets on here since he drives an LJ now.. but i can answer the questions for you.
they are 5x5, he does have unmounted pics and the rim size is 17x7.5 with 6.25" backspacing.
05-22-2013, 08:58 PM
What he said ha ha..
Actually black04wj is going to take them down there for me if I don't make it down. I was going to put them on my WK but they don't fit over the front calipers without a half inch spacer so I decided not to.
Also if someone only wants four, black04wj wants the 5.
wheels are in good shape. One has a scratch in the clear coat.
Last edited by 311WJ; 05-22-2013 at 09:02 PM.
01' WJ Limited, 33's, LA's etc.... JF 09' GCOTY
05-29-2013, 11:56 AM
I keep forgetting to look in the attic to see what all I might have, but I know of:
Ford 8.8 Axle Shafts (both sides): $60
'97 ZJ Radiator Skid: $20
'93-'95 Black Grille: $20
05-29-2013, 12:18 PM
D30 U-joint outers with tone rings installed for a WJ: $50 OBO.
WJ A-Arm spacer: $50
05-29-2013, 12:21 PM
ZJ 44A shafts - both sides $50
ZJ gas tank skid - $25
ZJ Mopar tow hooks - $85
WJ Mopar tow hooks -$85
05-31-2013, 11:37 AM
Just thought I would throw this out there...I have a 4.5" lift coming off a ZJ I am parting out. It is still under the Jeep but I would pull it for anyone who is interested in picking it up at GSW. Parts as follows:
4.5" RE springs
RE Front lower adj. CA
RE rear fixed lower CA
Teraflex front and rear adj upper CA
KOR adj. front track bar conversion
JKS rear adj track bar
front and rear bumpstop extentions
JKS quicker discos
Really, it is everything you need for a great and complete lift kit - just add shocks and go!
$750 for everything (less than 1/2 of and RE 4.5" kit which does not include the discos, track bar conversion, or adj. rear track bar)
05-31-2013, 07:27 PM
Justin - let me know if you're willing to separate (interested in the coils).
I already got a KOR trackbar conversion from you, don't need another
06-04-2013, 11:41 AM
Dana 35 ARB locker. $350.00
06-04-2013, 08:57 PM
Any body have some nice tube doors they would like to part with for cheap?
| « Previous Thread | Next Thread » |
| Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |
