Killallblues 2002 wj

[killallblue]

busted out the band saw to clean up the crap






got it sitting back alot further still need to tweak the harpoons and square off the ends

[killallblue]

so i got a winch for fitment still have tweaking to do and that strap was barely holding it up while i made sure it had clearance will all be level when it gets welded up. what do you guys think open to ideas

[killallblue]

no real updates got a new ds finally the right yoke new rear a arm bushings in

[bentwrench]

If you haven't finished the bumper yet i would look into recessing it into the front sheet metal and trimming the grill. A little more work for a better approach angle.

[CRJEeP_wj]

X2 with what bentwrench said. I did mine first as close as I could get without recessing it and hated it after about a month. Even with 42s I would hit it on steep climbs.

[killallblue]

haven't done it yet its on my weld list along with rockers now because of this lol

[scott]

How did you manage to do that?

[killallblue]

headlights cut out i pulled over onto the shoulder turns out was a sink hole that front bar is the only thing that stopped me from a full roll over

[CRJEeP_wj]

Whoa! That's some bad luck. That's kinda cool you didn't go all the way over. Did anything get broken on your rig?

[killallblue]

smashed rocker bent drag link and now the jeep is siting a inch lower on that corner and everything looks fine so i need to barrow a spring and see it that got messed up

[K2]

That sucks! Swap them side to side.

[killallblue]

was just thinking that after i posted that ill do it tomorrow and see if thats it ill order some new iro springs

[killallblue]

did some small stuff and took a trip
new tweets i used the factory speaker as a bracket




pile of parts


rebuilt all my joints






thinking about getting metal mesh and running like this



new yoke and ds

[killallblue]

photos from the small trip

[Ken L]

What all ended up being bent from your little trip into the ditch besides the drag link? Did you end up screwing up a spring? I hit a rock pretty hard snow wheeling a long time ago and bent the axle side lower control arm mount on one side, took a bit to find it. Your Jeep looks like it's sitting right now, that's why I ask.

[killallblue]

o i forgot to update on that so that front upper joint on the body got blown out and bent the snap rings and the side out so i bent it back for now waiting on johnny joints to swap them all out

[Ken L]

Makes sense. Thanks for letting us know what happened!

[killallblue]

some new temp tires for winter till next summer





buddy lifted his 6" now so us 3 years ago and last week






got some of the winch plate project done

[killallblue]

tires on



had to fix a control arm mount before the snow


let there be snow



day 2 of snow


decided to go out

[killallblue]

decided to redo my switch wiring and add a plug



picked these up off amazon needed something for night driving on back roads

[killallblue]

ok so i have a question i have a chance to get a set of wagoner dana 44s axles for almost nothing think it would be worth my time im never going bigger then 37s for the way i want to set my ring up

[killallblue]

well a set of wagoneer dana 44s have been given to me for free so i think thats what will be going under the jeep

[killallblue]

found a Columbia edition wj at the pick and pull i stripped it

[killallblue]

so i re did my tank tuck yesterday went 2" higher and made room for a hitch

[JohnBoulderCO]

Nice!