|
7 inch rustys offroad lift
rustys histeer/crossover 1 ton steering with fully greaseable heims joints
D30 front with superior evolution axleshafts,4.56 gears + detroit locker
D35 rear with superior super 35 kit, 4.56 gears+ detroit locker
NP 231 tcase with teralow 4:1 kit, and SYE
tom woods 1 ton driveshafts front AND rear
Flex a lite electric fan controller, wired for auto temp/manual high speed ON/manual forced OFF for water crossing, works GREAT.
AW4 trans with transgo shift kit,trans was serviced with new clutches/steels/filter/fluids
Huge trans cooler,autometer trans temp gauge on dash, never goes above 150/160,cruising it holds steady at 130/140
Cobra 29 cb mounted under the glovebox, tuned and tweaked, it really gets out there, mic mounted by the rear defrost switch
Pioneer cd player with aftmkt infinity speakers in all the doors{sounds NICE}
eagle alloy 15x10 rims with 3.5 backspace
firestone destination 33x12.5x15 mud terrains
Last edited by BigDaveZJ; 12-25-2009 at 10:23 PM.
7" lift with short arms for 33s on a super35? Holy shit...
I always thought greasable heims were really weak compared to normal ones?
Merry Christmas, and eat shit.
its normally on 35s,thinking about 37s...who knows, but it needs more gear for the 35s...the 4.56s dont cut it..
as far as the heims go, i dunno, ive had zero issues from them, i grease them regularly, and as far as the D35 goes, ironically ive broken the D30 twice with 33s,the d35 has yet to break...go figure, i have an 8.8 waiting to go in, once the d35 implodes.
whats up with the eat shit comment? lol
Removed the last two pics. Please see this thread for more info on why: http://www.mallcrawlin.com/forum/ann...t.php?f=58&a=4
looks good, would look alot better with a black or greyish bumper imo.
if you use ballistic link and coil mounts for your 8.8 make sure you cut them shorter to match the previous ride height because they add a good 2.5 inches of lift if you don't. and superior makes a great axle kit for the 8.8. just shop around. zj ebrake lines bolt right up and brake lines are the same as the zj. good luck and quit turd polishing the stock axles.
« Previous Thread | Next Thread » |
Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |