|
Shit.. I lost.
Lookin good man!
[COLOR=rgba(0, 0, 0, 0.701961)]I had some time yesterday to get my Currie Anti-rock sway bar installed. I used my old mounting brackets from my swayloc set up. Welded the currie tube in place, then bolted it on. I added new axle side mounts too. I shortened the side arms by one hole so they wouldn't hit the springs. I do still have to add some bends to them so the arm doesn't hit the pitman arm at full steering lock. Here are some pics: [/COLOR][COLOR=rgba(0, 0, 0, 0.701961)][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]Axle side mounts:[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]Mount tube in place:[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]Pitman arm/ drag link joint hit the arm:[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]I got the arms bent today. They needed 1" of extra clearance for the drag link. [/COLOR][COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s94.photobucket.com/user/greginaz/media/WJ%20Pics/Antirock/8A25D9AB-8AE5-4737-82A5-C583B581A200_zps6igc1iul.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s94.photobucket.com/user/greginaz/media/WJ%20Pics/Antirock/84308E9E-FA54-4E7A-BCDB-3655733FB1DC_zpstc8chebr.jpg.html][/URL][/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]Here is a drawing for the bend info:
keep in mind I shortened the arm by 1 hole to 16" overall.[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]
[/COLOR]
[COLOR=rgba(0, 0, 0, 0.701961)]http://s94.photobucket.com/user/greginaz/media/WJ%20Pics/Antirock/E1125583-C58E-4BFC-965F-D2AA7D20A6E5_zpsbapkkngp.jpg.html][/URL][/COLOR]
I am digging the build. really clean and nice work. Any updates since then?
Nothing really noteworthy. I did move the lower part of the front coil springs forward a little to help clear the shocks as they were rubbing a little towards full compression. I tested it again, and I still need to go forward a little more. 1/4" should hopefully do it.
She’s for sale! Time for a new owner who can really use it!
https://phoenix.craigslist.org/cph/c...061535165.html
Last edited by vinny4130; 02-05-2020 at 09:00 AM.
SOLD!
« Previous Thread | Next Thread » |
Thread Information |
Users Browsing this ThreadThere are currently 2 users browsing this thread. (0 members and 2 guests) |