Project Christine (formally Mini Maxx)

[Jeeperoni91]

ish painted

[Jeeperoni91]

15x10 6x5.5" 3.75 backspacing



tires yay



first one mounted and balanced



wheels on the way to meet their new home, mr dana 44 and sir ford 8.8

[Jeeperoni91]

sliders off cause they interfere with brackets


crossmember and front brackets


d30 on the way out


front hover craft


44 in




rear hovercraft




on the ground for the first time

[Jeeperoni91]

109 inch wheelbase



25.5 to rear axle from fender



almost 28 to front hub, not all the way settled yet

[Jeeperoni91]

asss shot



current exhaust...or not exhaust?

[Jeeperoni91]

[Jeeperoni91]

arb line for now, until i wire it up

bent arm




sliders getting adjusted a little


front end from tcase

[Jeeperoni91]

claytons adj lower rears will be here thursday to fix crooked rear axle (thanks cam...)

bumpstops will go in when arms go on

sliders are getting welded up tonight and sanded off, painted and put back on tomorrow in preparation for uwharrie

[ATL ZJ]

Ha! give me a break about the arms, I gave you a free longarm kit.

Yeah they are pretty toast. But the upside is you have trail spares... if you go superman on Claytons.

[spykosshow]

claytons adj lower rears will be here thursday to fix crooked rear axle (thanks cam...)

Can't bitch much, you paid 1800 bucks for several grand worth of stuff.

[Jeeperoni91]

I guess you can never be 'too' prepared right? And the 1800 dropped on the setup was only sweetened by the 2500 extra I've spent to get it all wrapped up

Ha! give me a break about the arms, I gave you a free longarm kit.

Yeah they are pretty toast. But the upside is you have trail spares... if you go superman on Claytons.

[grandmaster]

Yep, you have to keep that in mind. Everything you do is going to lead to something else.

[floridaZJ]

put a turn down on that exhaust... especially if you get the claytons..it'll eat those bushings up.

[dangerousdave]

If i would have had the money I was going to buy cams setup. I would have kept my ares and stuff and sold his arms off. You made off well for buying his stuff for that price.

[BigDaveZJ]

put a turn down on that exhaust... especially if you get the claytons..it'll eat those bushings up.

Or worse . . .

Most of you guys weren't around for this, but back in the day Chris_L had an exhaust like that. Melted his gas tank.

[Jeeperoni91]

claytons will be here tomorrow and I'm planning on just getting a small muffler like a glasspack and having a turndown on that, we'rll see

[UTChavok]

Are you doing something for front tow points?

[Jeeperoni91]

no, was planning on building a bumper or buying a hanson or something, but we'll see what happens with that....I've just towed and been towed by the warn D-ring hitch insert from the rear in the past, you can see it in my hitch in the pictures minus the d-ring so nobody will steal it at school or around town

[piku303]

build a bumper. a hanson is the price of a welder, steel, and a grinder. also do you have plans to trim and lower your setup?

[canadian_driver]

hanson no longer makes zj bumpers

[Jeeperoni91]

build a bumper. a hanson is the price of a welder, steel, and a grinder. also do you have plans to trim and lower your setup?

thats the plan

[Jeeperoni91]

At the campfire at uwharrie, jeep did great, made it up kodak and Daniel with mud and slick rock from all night rain. Wheeling in the morning and heading home, have pictures later

[Jeeperoni91]

here's the pictures i've got on my camera, kinda the same picture over and over on kodak but better than nothing, more later when others upload theirs that were with me.

































only damage to mine is bent pass fender from tire and slight tree scrape on driver side rear door, really impressed with my jeep and the ARB in the rear wasn't even hooked up

[faststang1]

Looks good!!!!

[floridaZJ]

lookin' good man. You going to put on some tube doors to help out the unibody or are you going to say the hell with it?