|
No I'm not talking about the antendees.
As a follow up to my thread about spare parts I figure I'd start this thread for tools and gear. Things like 3/8" drive sockets, wrenches, ratchet straps, jacks, jack stands and whatever.
I have this feeling that half my garage is going to come with me to Moab.
Half of Arlo's garage comes with him, so why not?
I found it was very helpful to have a good portion of my tools with me. Full socket set, and then the extras in my "field box". The red Craftsman box you saw in the back of my Heep when we went to Colorado A&P is fairly well stocked. I make sure to bring my electric impact and I make damn sure my axle socket is in there.
This year I an bringing my welder and a generator to power it
Or you could be like a good deal of people & bring vertualy nothing & just let the veterens fix your jeep for you.
This is really not ment as as insult to them. Just a bit of a jab. There are lots of people that don't mind piching in tools and knowledge when it comes to trail repairs & even spair parts. Although I might be done with that. I still have not gotten a very expencive shock back I loaned out at GSSW.
It does baffle me that some have come with hardly anything at all though. Maybe because they're so new the the hobby & what not. I dahno.
Ryan, you might want to think about that...speed bumps could be a challenge with your already shitty departure angle
Scott, you're probably not too far off there. I honestly had a lot less spare parts last year than I will this year. It does take time to learn what all you should bring, and it takes truly looking at how remote some of the trails are.
A few of those have shown up in the past too!!
Arlo's floor jack FTW!!!
I'm with Scott, I don't see how people can just show up with nothing to fix their shit if it breaks. I don't know if it's being an Eagle Scout that makes me want to be prepared as possible, or just my desire to not have to rely on someone else to bail me out, but if there's even the SLIGHTEST chance I may need a tool or part that I have, it comes with. I bring every socket I have, all my ratchets, wrenches, hammers, screwdrivers, pry bars, whatever I can fit in my Rubbermaid box in the Jeep. Also bring along air tools for the CO2 tank. I also keep power tools like sawzalls, grinders, etc back at the hotel cuz there's usually some pretty intense repairs going on at night.
I made a trail repair kit a few years ago after a clubmember didn't have a lot of parts to fix his rig that day...So I bring this, in addition to my actual tools.
Floor jack (only ever brought that to Moab, Colorado trails just get a highlift)...jackstands, wrenches, ratchets, ratcheting wrenches
Very good thinking on the drain pan too, that's one area that I'm kinda lacking in. I've got all the fluids I could ever need, but outside of napkins and paper towels I don't have much in the way of keeping fluids off the ground.
Sandy carries the ultimate garage in the back of his Jeep!
I agree that there are several bulky/heavy things like jack stands or power tools that would be nice to have in Moab but don't make a whole lot of sense to have out on the trail. That said I can only hope it I really did need an angle grinder out on the trial that someone could shuttle me back to town. That reminds me, better pack the 2000W inverter too.
Right now my biggest fear is that I'll have 500lb of stuff bouncing around the back of the ZJ while out on the trail. I definetly need to be selective as to what will come out on the trail so I don't loose too much ride height. I figure if I cant get it into 2 containers plus a small tool box it stays in the hotel (or at home).
Another thing I'll be stocking up on is the fluid "diapers" at Wally world. I wanna say Zorb or something like that. It's in the oil aisle, near the gear oil. They're like a buck a piece or something, but they soak up a whole lot of fluid. When you change out a radiator in a ZJ, you lose about a pint or so of ATF from the tranny cooler - put one of these in the path of the spill, and they soak it up very well.
In our fire department, we carry it on all of our fire and rescue trucks, it's called "Speedy-Dry" or "Oil-Dry". Same stuff they use on race tracks.
20 years ago, if we had an oil or fuel spill on the road, we would just charge the booster line and wash it off the road. Now, that is prohibited. We're not required to pick it up, but we just lay down the speedy dry, and leave it. Off road, we all need to be even more concerned about the environment. Carrying the jug of this stuff is a great idea. If you have an accidental spill you've got to do your best to absorb as much as possible, as quickly as possible, before it absorbs into the ground. Then scoop it all up and take it off the trail with you.
Ratchet straps are your friend to keep that stuff tied down. The last thing you want in a roll is to get smacked in the head by a flying BFH.
A good power inverter is nice to have too. After Keith was so kind as to weld my tranny cooler line a few years ago on Cliffhanger we used an inverter and a dremel to cut the offending section of metal tranny line out and then sleeve it with high pressure fuel line.
I've used the floor ones successfully, they seem nice and strong. The ones on the side panels suck balls.
x2
I've had the side ones pop out many times, back when I still had panels in the back of the interior anyways. I've been using the cargo hooks on the floor for 8 years now without an issue. I had to remove one to mount my CO2 tank flat on the floor and they're in there pretty good.
I am sure there are other contacts, but one of the race teams I work with is in Moab and he has already told me that if we need anything while we are there he has a full garage that we are welcome to use if needed.
Just throwing that out there. I actually need to swing by and say hello while I am in town.
There is this stuff called pete-sorb (I think) It breaks down the enzimes in oils and fluids to make it less hazardess to the enviroment and it is completley bio-degradable (SP) So there is no clean up. Aslo Pig-Pads are great they can actually pull oil from water without soaking up much water. The water it does absorb can be squezzed out without the oil leaving the pad.
« Previous Thread | Next Thread » |
Thread Information |
Users Browsing this ThreadThere are currently 1 users browsing this thread. (0 members and 1 guests) |