half doors

[wheelinzj93]

i saw a guy on myspace who had a xj and he made half doors out of a set of junkyard doors. they were for the front and looked good for offroad. has any body made one for a zj. Pics? XJ Doors

http://users.ucom.net/~werwe/door.html

[fpkites]

Search!!!!!

Swamp Boy
http://www.mallcrawlin.com/forum/sho...ght=half+doors

Do a search for half doors and you'll find a few that did it. 5 minutes of your time, man

[MoonWorks]

Nope...can't be done with a grand b/c of the extra thick metal used on the doors!





















Search!

[JordanA]

Elliot, Puma297, made some too.

[adam99wj]

Nope...can't be done with a grand b/c of the extra thick metal used on the doors!





















Search!

i agree with preppi12, the grand cherokee doors and the bestest doors ever...

[jsteves]

And I heard they leak even if you can cut through the metal.

Nope...can't be done with a grand b/c of the extra thick metal used on the doors!





















Search!

[IndyZJ]

are we talking upper half or lower half? I've heard it can be tough to roll up the windows afterwards

[fpkites]

If you cut off the lowers, where you gonna put the speakers? Can't be ballin' without speakers...noob

[wheelinzj93]

If you cut off the lowers, where you gonna put the speakers? Can't be ballin' without speakers...noob

i've got the speakers covered with the amp... tard and i wanted to cut the top half and keep the bottom. Did you check out the link i put up? i want to try the same style as the cherokee did.

[fsjtrash]

Then try it. You're allowed.

[wheelinzj93]

Nope...can't be done with a grand b/c of the extra thick metal used on the doors!





















Search!

are you trying to say a sawzall, a cutting wheel or a torch can't cut the metal?

[MoonWorks]

are you trying to say a sawzall, a cutting wheel or a torch can't cut the metal?

If you know so much than do it! HAHA

[BigDaveZJ]

are you trying to say a sawzall, a cutting wheel or a torch can't cut the metal?

The ONLY way to cut it is with nail clippers. Nothing else works.

[dangerousdave]

wow..... dude. i can tell you now searching is your friend. There are lots of great builds on this sight. If you want to model them like th xj do it, take pictures and post them. Cut the metal however is best for you. I use a angle grinder for everything. it takes alot of time and sucks for strait lines. It will all change when i get my plasma cutter. Even though i might be 50 then.

[ELLLLLIOTTTTT]

[wheelinzj93]

i like the arm rest part. thanks for the pics. out of curiosity what are the 2 gauges in front of the windsheild

[AgitatedPancake]

guys dont worry...he's got the speakers covered with the amp. DUH!

[MoonWorks]

i like the arm rest part. thanks for the pics. out of curiosity what are the 2 gauges in front of the windsheild

Bottom one is empty. The top one is a temp gauge for the beer fridge in the back.