ATSG -42RH, 46RH, 47RH

[cooperzj]

This is it- the service manual that will save your life if you have to rebuild your transmission.

It's a huge file, but you will need it.

http://documents.scribd.com/docs/2j3...8tf9meafox.pdf

[BLK97ZJ]

Cool Thx
I saved that sucker.

[wheelNC94GC]

Thansk man I needed that!

[hkszx2]

awesome Im getting ready to pull and rebuild mine.

[jfowlzj95]

Nice! I'll probably need that soon too, my tranny is starting to slip.

[TrojanMan]

Thanks, i'll need that



oh wait a second, I swapped mine out

[J B]

Anyone got the ASTG manual for those of us with "E"s instead of "H"s?

[slim616]

good Post, this should help alot.

[nate]

E and H are the same trans other than the E doesn't have a governor and 2 metal lines running from it to the output shaft support. In fact you use the same output shaft support, just on the RE trans you stick 2 little plugs in the holes were the lines go.

The E trans uses a govenor pressure solenoid and transducer in the valve body to do the same job.

There isn't a book for the E trans that I know of. The one I used had a little pamphlet of about 3 pages that covered the E transmissions and that was it.

[OverkillZJ]

That's a keeper, ya learn something every day...

[J B]

Oh, cool info. I didn't figure there was much difference. Hell, these transmissions are changed very little from the TF727 from back in the 60s.

[hkszx2]

I started to rebuild mine today and between this and the fsm it all almost everything covered

[Ken L]

Thanks for the hook up!

[carbuckle]

Ken I can't access the file

[Dakkedout]

I can't seem to access this files either. I'm new to this forum, so it might be something I'm doing/not doing. The link provided is just a usual link, correct?