PDA

View Full Version : GSW parts swap



Mtn WJ
05-09-2006, 01:39 PM
Often each year at GSW folks bring spare parts for sale or trade. It might help you get rid of them if you post them here before GSW.

Keep in mind this is not an official GSW activity and merely a suggestion for those of you who may be able to secure a buyer for your stuff. All dealings and meetings are your responsibility.

With that in mind I will post up my offerings:
Dana 35 non c clip ARB for 3:73 and up gears in good condition: 300 obo
Dana 30 open carrier for 3:55 and up gears 40.00 obo
Dana 35 open carrier non c clip for 3:73 and up gears 40.00 obo
WJ V8 Up country springs 100.00 will fit 6cyl WJs but will not fit ZJs

AgitatedPancake
05-09-2006, 02:09 PM
this is stuff i *might* have, depending on room and other stuff.

Stock WJ control arms
stock V8 WJ springs
stock track bar
RK LCAs

I dont really have prices as I didnt expect an opportunity to sell them at GSW so...yeah. Offer?

JohnBoulderCO
05-09-2006, 02:10 PM
I have a WJ QD D30 carrier AND factory 3.73 gears.

Snowman
05-09-2006, 04:27 PM
I have Dana 30 and Dana 35 3.73 diffs which are looking for a good home.

We can talk prices over beer or martinis [martiniis?].

:funny:

BigDaveZJ
05-09-2006, 04:33 PM
I MAY have the following:

JKS/ORGS rear adjustable trackbar
RE SuperRide Adjustable Lowers (all 4)
RE SuperFlex Adjustable Rear Uppers

Depends on if we decide to keep the stuff for Pam's ZJ or sell it to help off-set the cost of Clayton's kit.

I'll also be hauling out a set of Kevin's Round Tube ZJ Sliderz too if anyone is interested in those.

Snowman
05-09-2006, 04:43 PM
I MAY have the following:

...I'll also be hauling out a set of Kevin's Round Tube ZJ Sliderz too if anyone is interested in those.

I bet the rock sliders become popular after someone custom forms their rocker panels.

XLSLC
05-09-2006, 05:51 PM
Free for anyone who wants them:

stock zj front TB
stock zj UCA's (all)
stock zj LCA's (rear only)

let me know if you're gonna want this stuff or else it won't be coming along

ArloGuthroJeep
05-09-2006, 11:07 PM
WJ suspension components:
Stock front UCA's/LCA's, rear LCA's, springs all around, tie rod, track bar, sway bar end links (front).

Halfdoc
05-09-2006, 11:48 PM
Hmmm.

WJ stock UCA/LCA/TB/crossmember
WJ stock snowflake wheels (5)
WJ stock roofrack crossrails
WJ inferno red front bumper with fogs

PM if I should plan on bringing any of this.

David

Pitch
05-10-2006, 12:15 AM
I've got:

-Complete WJ D35,open 3.73's , will part for whatever you need. Spare shafts anyone?
-D30 3.73's (short pinion, standard rot. I think, from a WJ)
-WJ fog light... Driver's side

FearTheDentist
05-11-2006, 12:01 AM
Hmm...I've got:

Kevin's Offroad roof rack for WJ
WJ roof rack cross rails
Stock WJ rims and tires w\ 3k miles on 'em (The rims are "Avila"- style 7b @WJJeeps.com) and full size spare.
Stock D44a and D30 3.73 gears
Stock WJ control arms, springs, shocks, rotors (3K miles), air box, probably other things I'm forgetting too.
(5) 31x11 Interco Thornbirds on 5 on 5 American Racing chrome Python rims (yes, you read right. Thornbirds. Long live the thunderchicken!)
Front WJ bumper fascia w\ foglights, in white.
'79 Bronco stock radius arms, tie rod, and drag link.

AgitatedPancake
05-11-2006, 02:32 AM
dentist are those (specifically the 30) axles QD?

zjmike4
05-11-2006, 03:04 AM
I could use d30/d35c shafts for a zj, anyone got some and want to bring em out? I will take em off your hands

Snowman
05-11-2006, 10:55 AM
I could use d30/d35c shafts for a zj, anyone got some and want to bring em out? I will take em off your hands

Were you going to take them off our vehicles????:rofl:


:funny:

FearTheDentist
05-12-2006, 02:27 AM
dentist are those (specifically the 30) axles QD?

Um- afraid I don't have any axles available- just the gears. Keith actually has my stock D30 axles, maybe you can sweet-talk him :D

AgitatedPancake
05-12-2006, 03:42 AM
Um- afraid I don't have any axles available- just the gears. Keith actually has my stock D30 axles, maybe you can sweet-talk him :D

WHoops, misread on my part...its all good thanks man,

SteelCityOffRoad.com
05-12-2006, 08:56 AM
Something tells me I am sending Overkill that way with some nice new RockCrusher diff covers... Maybe a few other things as well...

rrubio
05-12-2006, 09:44 AM
Something tells me I am sending Overkill that way with some nice new RockCrusher diff covers... Maybe a few other things as well...
That would be nice.I could use a rear diff cover.

zjmike4
05-12-2006, 07:05 PM
Were you going to take them off our vehicles????:rofl:


:funny:

um... no spares, duh.

mckeonm
05-14-2006, 12:43 AM
Hello,

Here is what I have:

Dana 35 with 4.10 gears (with disk brakes)
Dana 30 with 4.10 gears

Both of the above ready for KOR Long arm kit

Rusty's off road T-case skid plate
Atco rear sway bar with greaseable bushings
Factory rear bumper cover (in good shape with the exception of a few deep scratches on the under side of the left corner.

All of the above are for a ZJ

Let me know if there is anything someone wants

I will not have room for the axles, However we can talk about if you really want them.

MarkCO
05-16-2006, 09:59 PM
Originally I was going to switch my rear axle from QD to normal and install an aussie locker, however after running into difficulties I've decided instead to do an axle swap. But now I have a lot of leftover parts that I'm not going to use. I can return quite a few of these parts to Randy's for a restocking fee, but I'll bring them with me as field spares. However I'd also let them go for what I could return them to Randy's.

New D44A open carrier with bearings pressed on, and built with a Aussie Locker installed. I won't be returning this, but I guess I should get around to selling it.

1 Pair (New) Superior Rear axle shafts for ZJ (w/o/bearings)
1 Pair (New in Dana box) Dana OEM Rear axle shaft assemblies for WJ (w bearings and retaining plates

Colorado 5.9
05-16-2006, 10:12 PM
New D44A open carrier with bearings pressed on, and built with a Aussie Locker installed. I won't be returning this, but I guess I should get around to selling it.



Hummm? Very tempting. I think it would fit in my case, right?

How much?

MarkCO
05-16-2006, 10:26 PM
Hummm? Very tempting. I think it would fit in my case, right?

How much?

I'm not sure if there are differences between the carrier in ZJ/WJ D44A's. Since ZJ uses c-clip axles, it would make sense that there might be a difference but never having had a ZJ D44A apart, I'm not qualified to comment on it.

As for the price, I'll have to dig out the invoices and figure out how much I've got in it so far.

Kraqa
05-21-2006, 12:50 PM
Something tells me I am sending Overkill that way with some nice new RockCrusher diff covers... Maybe a few other things as well...

if you want me to plaster my jeep with yoru steel city off road stickers i'l take on of those covers for my front 60.

wannabe_offroad
05-25-2006, 01:54 AM
I have a brand new Mopar gas tank skid for the WJ that I should be able to fit inside for the trip out. Let me know before hand so I know whether or not to waste the space on it. I'm willing to sell (obviously) or trade for some v8 wj upcountry springs or possibly something else. Let me know

ArloGuthroJeep
05-25-2006, 09:34 AM
I have an UCA bushing I'll be bringing for sale/trade: http://arlojeep.com/Misc-Pics/Bushings-5-24-06/Weberized/P5240214.jpg

Pitch
05-25-2006, 11:38 AM
Anyone want to part with a set of shocks for a ZJ with 3" of lift?

Krash80
05-28-2006, 03:13 AM
Does anyone who has upgraded to a Mopar Performance ECU have their stock computer for a 5.2L? I need one for a dead ZJ at my house.

-Ron-

Matt
05-28-2006, 06:46 AM
Anyone want to part with a set of shocks for a ZJ with 3" of lift?

Hey Pitch, I'll have some shocks that were lightly used and a year old, they are 2" over stock and worked good when I was running with a 3" lift. They're Procomps, how's $20 for all 4 sound?

Matt
05-28-2006, 06:54 AM
Here's a list of stuff I have
D44AL- 3.73, limited, good shape minus calipers
31x10.50's MTR's with 40% tread, fair wear, no holes.
HPD30 with vacc disconects, not sure about gears/carrier
XJ/ZJ RE front adj track bar with drop bracket.
some other stuff too, I'll have to dig around.

Pitch
05-28-2006, 01:24 PM
Hey Pitch, I'll have some shocks that were lightly used and a year old, they are 2" over stock and worked good when I was running with a 3" lift. They're Procomps, how's $20 for all 4 sound?

Sounds great, I'll take them, and see you in Moab!

Matt
05-31-2006, 11:04 PM
Sweet, sold. I have them for you thursday night. PM'd you my phone # just in case. C ya in Moab.

Thanks, Matt

Kraqa
06-01-2006, 02:43 AM
i'l have the following:

JKS front sway bar disconnects
Brand new stock fuel pump/sending unit
new stock 93-98 rear tail lights
-1.75 cpoil spacers (rear only