2jeepsforus
05-06-2006, 07:34 PM
I'm in the process of installing my 4.5 RE lift kit, that i bought used. Unfortunately I had to cut out one of my front lower control arm (axle side) adjustment bolts. You guys know the one that is locates your axle forward or backwards. The freakin thing was froze solid. Anyway, I was wondering can I just replace it with a standard grade 8 bolt and try to get it centered or what? I am using Fixed lowers on this install, until I can afford some adjustables. Any input would be great
This is what I am planning
4.5" spring, remove stock spacer and run 2" spacer in place of that for an additional 1" of lift to level out the jeep/arb/winch.
Thanks guys,
Dave
This is what I am planning
4.5" spring, remove stock spacer and run 2" spacer in place of that for an additional 1" of lift to level out the jeep/arb/winch.
Thanks guys,
Dave