PDA

View Full Version : AA SYE



blackjak71
03-02-2006, 09:27 PM
Anyone have the installation guide for the AA SYE kit for a 231, cant find it on their site.

fr3db3ar
03-02-2006, 10:24 PM
I installed one of theirs......you'd think I could find that around here somewhere.:pissed:

blackjak71
03-03-2006, 10:12 AM
anyone?

fr3db3ar
03-03-2006, 10:53 AM
http://www.rubiconusa.com/instructions/rubiconexpress/RE1807A.pdf

try that. Basic with no pics

blackjak71
03-03-2006, 10:57 AM
thats a hack and tap, but thanks

fr3db3ar
03-03-2006, 11:53 AM
Sorry bout that...I should have read it first I guess. Here's another link to the super short install....but I believe this should be similar....and it has pictures :smt081

http://www.jbconversions.com/pages/products/np231/np231j_short_sye_ins.html

Here's another one that says it's a tom woods kit.

http://www.fullsizexjgear.com/Tom%20Woods/Install.html

blackjak71
03-03-2006, 06:04 PM
thanks, big problem that im running into now is that with this kit there is a piece of machined aluminum attached to the bearing house on the backside, i removed the allen key bolts but its firmly on there, gave it a couple of good shots with a rubber/plastic mallet but cant get them to seperate, dont want to wack on it too hard because im worried about messin up the oiler pump?

anyone have a suggestion?

reason for this is so i can really seperate the front half of the case from the rear because teraflex said they would swap out the input shafts from 21 to 23 so that i can mate it to my trans.

fr3db3ar
03-03-2006, 10:10 PM
I have no idea....I didn't split my case. sorry.