luvthejeep
02-28-2006, 01:10 AM
il looking for a rod end with a regular needle bearing in it as opposed to a spherical bearing, it just needs to rotate, not piviot- just like a clevis sbut with a bearing- i want to use these on my tie rod so i dont get that "tie rod rotation" when you steer- you all know what i mean- when you steer the tie rod, weather its connected with heims or ball josint rotates alittle as opposed to moving the wheels and creates a dead spot- i think it wold work out cool- they need to be 3/4 lh and rh fine thread, also strong enugh for steering duty, the bearing has to be 3/4 id, also if it had sealed bearings that would be tittie's- out of all you fabricators out there someones got to be making something like this-
it would look just like this but put a bearing in the open hole-
http://i8.ebayimg.com/03/i/00/c8/4b/77_1.JPG
it would look just like this but put a bearing in the open hole-
http://i8.ebayimg.com/03/i/00/c8/4b/77_1.JPG