PDA

View Full Version : RE UCA question



J2000_guy
02-01-2006, 01:42 AM
im putting on new upper control arms, (RE 3780), and on the axle side mount between the bushing there is about a 1/8"-1/4" gap. what do you guys think? it should be tight with the bushing right?

Deltron
02-01-2006, 03:18 AM
Yeh it should be tight. check your bushings to see if they are worn to hell...if not then I would just tighten it down and let it pull it self tight, or you could find a washer or something. just reason through it and you should be fine. peace
Del the funky fourwheeler