PDA

View Full Version : Pair of stock spring isolators...



BMRisko
10-19-2005, 04:12 PM
I need a pair of these. They are the rubber isolator that goes between the spring and the body. Let me know if you have an extra pair sitting around that you no longer need.

Thanks!

97trxuszj
10-19-2005, 04:14 PM
I got a piar you need them for the front or rear? I also have 2" pucks also

BMRisko
10-19-2005, 04:25 PM
I got a piar you need them for the front or rear? I also have 2" pucks also

I just need a pair for the rear, although the fronts should be the same. Sorry, I don't need any 2" spacers at this time.

BLACKZJ
10-19-2005, 07:14 PM
I just need a pair for the rear, although the fronts should be the same.

Negative, front and rear are not the same. Although in your other post,you were lookin to do F>R swap. I have some factory rear ones that I can't use cause I got front springs back there. P.M. me if you're interested.
Later,
Jeff

BMRisko
10-20-2005, 03:02 PM
Got a set from AW. Thanks guys...