PDA

View Full Version : heim joints on drag link



luvthejeep
08-10-2005, 12:15 PM
i need a new drag link, rustys builds links REALLY cheap, i can get a DL built out of 1.5" x .25 wall dom for 100$ plus shipping including the joints that run 36$ a piece. they run a heim at the tie rod, thats pretty standard but the also run one at the steering box, they drill out the arm to 5/8" and put some missalignment spacers in there. what do you guys think of that? drilling a stock arm? my biggest concern is the amount of flex i have i would think it would max out the joint and premptivly rip off my oh-so sweetly enginnered steering box...

nate
08-10-2005, 04:41 PM
Check out Shakerbuilt.com. I had both my link made by him. Was around $130 shipped. Over 1/4" thick stuff.