View Full Version : HELP quik stearing upgrade "1 ton" TRE for drag li
Kraqa
07-27-2005, 12:45 PM
what PN for the TRE for the pitman arm to drag link for the cheezy "1ton" upgrade. i blew mine out and need to get it today. this should be the high missalignment one.
i'v found PN's but none of them specificly say which one is for the drag link to pitman arm.
1/2 ton steering...
ES2027L is the TRE for the pitman arm to draglink
ES2233L is the draglink to tie rod (one you ream out)
ES2234R (2 of them) are on the driver's knuckle and draglink to 2233L
Yes I have those memorized for some reason haha.
ATL ZJ
07-27-2005, 05:20 PM
Has anyone found anything stronger? I haven't broken any myself, but that upgrade doesn't seem as stout as it did a while back...
It's name has slowly gone from 1 ton-->3/4 ton--> 1/2 ton..
Kraqa
07-27-2005, 05:20 PM
i have bent 2 ES2233L and one drag link to pit man arm
forexfour
07-27-2005, 07:14 PM
I am right behind you with 3 bent and 2 worn out steering knuckles.
I have but I have not re-set it up and ran it since I put on the new knuckles and on top of that I hate to say what kind of set up it is because of the auto manufacturer that puts it on their vehicles I hate.
It is a true 1 ton setup and a solid piece I just need to get a drag link made up then run it to see if I like it like I did before I got all the slop inthe reamed out knuckles.
Stronger would be 1 ton TREs which are 1x18 instead of the 7/8x18 the 1/2 ton stuff is. The taper is larger as well.
Look at Dodge. The steering under my CTD is all beefy... except the TREs are the same taper/size that Jeeps have :rolleyes:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.