PDA

View Full Version : TJ D30 hubs 99+



BigDaveZJ
07-22-2005, 08:41 PM
Can't remember the exact cutoff year for the hubs as to which fits what, but these are the newer style hubs that won't fit the older model TJ 30. Should fit either 99 or 00 and up.

No clue on mileage, hubs feel nice and tight though. Bought shafts and hubs from a guy with a TJ to get spare shafts for my ZJ, and can't use the hubs.

These go for well over $100/each brand new, so let's say $100 + plus shipping from 80109for the pair. Buy 'em both or don't buy 'em at all! No pics either, unless you really need to see what they look like, and if you're buying these, I'd imagine you know what a hub looks like.

PM me.

nate
07-25-2005, 01:17 PM
Those should fit any ZJ Dave.
I've only seen the old style unit hub older XJs and some YJs.

BigDaveZJ
07-25-2005, 01:18 PM
Those should fit any ZJ Dave. The old style unit hub were on 80-early 90s XJs and YJs.

One would think they would, but they don't. I put some from a 00 TJ on my ZJ and the hubs were a little bit smaller, enough to where the rotor was pushed up against the caliper mounts and wouldn't allow the wheel to rotate.

nate
07-25-2005, 01:37 PM
Hmm...

I know the differences are like 1/4". There are 2 sytles of rotors and unit bearings. If you mix them, it won't work out. I do know that my 98 had the same as a 99TJ, as did a 97 TJ.

BigDaveZJ
07-25-2005, 01:39 PM
97-99 TJ's used the same hub as our ZJ, after that theyre different.