PDA

View Full Version : Instrument Cluster Out 95 ZJ



ny1995zj
07-18-2005, 10:39 AM
I guess you can call me a newbie to Jeeps. I figured I would ask, before I tore my dash further apart and started testing.

I had my dash off about a week ago to run some wiring for aftermarket equipment. The equipment had nothing to do with the instrument cluster wiring. After replacing the dash, I turned my lights on so that I could take the Jeep around the block. My instrument cluster lights did not work.

1. It is just the speedo, tach, fuel, oil, temp, etc. Not the brake light, etc.
2. The dimmer/interior light switch has been checked (it is on, wiring may be an issue)
3. The fuse has been checked
4. The harness is intact in the back of the panel.
5. I have searched

Other issues:

There is a blue plastic piece in the middle of the under-dash area holding what appears to be a circuit board, but does not appear to have a purpose. What is this?

There is a harness holding a purple wire, and a white wire coming out of the back of the stereo compartment, but is not wired to anything. What is this?

If you need further descriptions or pics, just ask. I figured I would start basic at first. Any help would be greatly appreciated.

Thanks!

Kraqa
07-18-2005, 03:27 PM
pics