PDA

View Full Version : BACK ON THE BLOCK: Grill Guard, Nerfs, Tail Light Guards



SCAMPER ZJ
07-11-2005, 06:48 PM
Some of this stuff has been collecting dust in the basement for over three years. My wife says it has to go, so it's going!

The first item is a Smittybilt grill guard, originally sold for over $400. It has a few scratches, and the bottom bar is slightly bent from when I tried to buck my way out of a creek bed, but is otherwise in good condition. Some lucky ZJ owner can make it theirs for $79! Brackets are included, but you'll have to pick up some bolts at Home Depot, ACE, et. al.

http://www.jeepsite.net/SALEgrillguardSOLD.jpg

Matching tail light guards are also on the block. The pair can be had for $29. You won't find anything comparable for less than $100 retail!

http://www.jeepsite.net/SALEtailguardsSOLD.jpg

No ride can be considered fully pimped out without a pair of stylin' nerf bars! Though not the best as far as rocker panel protection is concerned, they do look good! There are a couple of scratches on the underside from rocks (OK, maybe just a touch of rust under there too, but nothing a little Rustoleum can't take care of). Retail was over $200, but they're yours for the low, low price of $49!!

http://www.jeepsite.net/SALEnerfs.jpg

Finally, we have this fabulous 3" lift kit! The springs (I cleaned one of them off so that people can see what color they are) are Rancho, and the shocks are performance shocks (lifetime warranty) that at one time went for almost $100 EACH new. I'm asking $99 for springs AND shocks.

http://www.jeepsite.net/SALE3inchliftSOLD.jpg

But wait, there's more! If you take it all, you can pay just $199!! BARGAIN!! :smt003 I prefer offers from Colorado, but I'm willing to discuss shipping if you REALLY want it. Interested parties, PM me.

nathaniel
07-11-2005, 10:33 PM
Stan,
How much for just the springs?

SCAMPER ZJ
07-11-2005, 11:34 PM
Hey Nathaniel,

I would prefer to sell the springs and shocks together, if I break 'em up I may not be able to sell them separately. Tell you what though, if you think you can use 'em, send me an offer in a PM.

Stan

zjjeeper33
07-12-2005, 07:57 AM
shipping to 17356 for the taillight gaurds

SCAMPER ZJ
07-12-2005, 09:46 AM
shipping to 17356 for the taillight gaurds

I'll weight 'em this afternoon and get back with you.

JeepinHank
07-12-2005, 11:06 AM
I swear I almost feel like I'm watching an ad for a used car salesman or something that Billy Mayes guy sells on TV. Great ad - plenty of personality! :mrgreen:

No offers or interest, but BTT for ya.

THE_assman
07-12-2005, 01:17 PM
check ur pm's, that kit is moiyn.

phillyzj
07-12-2005, 03:48 PM
how long are the shocks?

SCAMPER ZJ
07-12-2005, 05:38 PM
I swear I almost feel like I'm watching an ad for a used car salesman or something that Billy Mayes guy sells on TV. Great ad - plenty of personality! :mrgreen:

No offers or interest, but BTT for ya.

Glad you like the ad! Don't know if I like being compared to a used car salesman, though. . . :smt003

SCAMPER ZJ
07-12-2005, 05:44 PM
shipping to 17356 for the taillight gaurds

Looks like snail mail would be about $14 shipping. Priority (2 day) is about $16. Funny, I thought there'd be more of a difference, but that's what I'm getting for approx. 10 lbs. at US Postal Calc (http://postcalc.usps.gov/) from 80233.

If you're still interested, PM me with your address, and I'll tell you where you can PayPal to.

SCAMPER ZJ
07-12-2005, 05:53 PM
check ur pm's, that kit is moiyn.

You got it, bro - I'll put a SOLD sign on the shocks and springs. Pleasure doing business with you!! We'll work out the shipping and payment stuff via PM.

Stan

SCAMPER ZJ
07-12-2005, 05:58 PM
how long are the shocks?

Thanks for the interest PhillyZJ, but I already had a solid offer from another Mallcrawler. I'll let you know if it doesn't pan out, and definitely keep you posted on future basement sales! :smt033

mud zjerk
07-12-2005, 06:28 PM
PM sent

SCAMPER ZJ
07-12-2005, 11:26 PM
The person who expressed interest in the nerf/tail light guards/grill guard had to back out because of unforseen financial developments. Therefore, the items are back on the block (except the 3" lift which HAS been sold).

SCAMPER ZJ
07-13-2005, 07:47 PM
check ur pm's, that kit is moiyn.

OK, the springs and shocks have been sent to you Chris - I'll PM you the tracking number tonight or tomorrow. It is going via parcel post, they told me approx. 5 business days.

Have fun with 'em, pleasure doing business with ya!
Stan

SCAMPER ZJ
07-27-2005, 09:39 PM
Grill guard. . .

Nerfs. . .

Tail light guards. . .

ARE BACK ON THE SELLERS BLOCK

(as are the tow hooks at http://www.mallcrawlin.com/forum/viewtopic.php?t=2760)

doyll
07-28-2005, 10:42 AM
I'm interested in .. probably complete package. But I'm in Montana. How much do they weight?
Thanks
Lloyd

AngryDog
07-31-2005, 10:55 PM
Will these fit a 99 WJ? If so I'll take them. PM me with the final price with shipping to NY, 12043. I will PayPal promptly and send along the shpping addy.

SCAMPER ZJ
08-01-2005, 01:51 PM
Hey AngryDog,

I don't think they'll fit on a WJ, sorry, they were made for the ZJ (I should have mentioned that). Thanks for the interest, though!!

Stan

XLSLC
08-03-2005, 12:21 AM
PM'd you, I'll take the tail light guards.

Swamp boy
08-03-2005, 02:36 AM
Grillguard Shipped to 70058???

GrandTSi
08-03-2005, 11:12 PM
Are the taillights guards still available?

SCAMPER ZJ
08-04-2005, 02:25 PM
Hey Swamp boy, shipping would be about $30 including packing/shipping to 70058. Not too shabby! :smt003

Sorry I took so long to get back with you, my wife and I have been over at the hospital the last couple of days - we've got a brand new baby boy!!

PM me your address if you're interested, and I'll give you my PayPal account info.

Stan

SCAMPER ZJ
08-04-2005, 02:27 PM
Are the taillights guards still available?

Thanks for the interest GrandTSi, looks like they're sold. Once money is in hand this evening, I'll put up the sold sign. I'll let you know if things change, though.

Regards,
Stan

XLSLC
08-04-2005, 02:27 PM
Tailight gaurds are taken :supz:

SCAMPER ZJ
08-04-2005, 02:29 PM
PM'd you, I'll take the tail light guards.

Sounds good, we'll look forward to seeing ya later this evening.

THE_assman
08-05-2005, 01:37 PM
can u give me shipping for just the brush guard to 40059?

SCAMPER ZJ
08-05-2005, 03:23 PM
can u give me shipping for just the brush guard to 40059?

'Sup, Chris! How'd your lift work for ya? Bet it looks good, you should post some before-and-afters.

The grill guard is $30 shipping including packaging (5-day parcel post). PM ASAP if you're interested.

Regards,
Stan

THE_assman
08-06-2005, 09:55 PM
hey man, the lift worked out great, lookin good. i still havent wheeled it yet because i need to put my trackbar on, as well as some quick discos, but other than that i love it. it sucks because ive been lookin forward to findin some mud, but there can't be mud when it it 98 degrees out and it hasn't rained in 2 weeks!! anyway, check ur pm's.

Swamp boy
08-06-2005, 10:49 PM
PM Sent..

Swamp boy
08-07-2005, 09:06 AM
Check your Paypal account.. Money sent.. :supz:


Carl

SCAMPER ZJ
08-07-2005, 07:23 PM
Check your Paypal account.. Money sent.. :supz:


Carl

Right on, thanks for your business, Carl!

Stan

Nined6Grand
08-07-2005, 08:06 PM
Wasup.. I may be interested in the pimp bars for a hack project. Can you tell me what the O.D. is, and wall thickness? I'm in Arvada, so may be an easy deal.

Thanks
Ken

SCAMPER ZJ
08-07-2005, 09:17 PM
Wasup.. I may be interested in the pimp bars for a hack project. Can you tell me what the O.D. is, and wall thickness?


Hey Ken,

Not really sure what the thickness is on the nerfs, but I can tell you that they have held up to getting hit by a couple rocks. . .but I doubt that they're very heavy-duty (not like Sliderz). . .diameter is around 9.5".

Stan

Nined6Grand
08-08-2005, 06:09 PM
Hey Stan........

Thanks for the info......but I'm curious about the diameter - 9.5"? Thats a F A T round bar !! Maybe more like 2.5 or 3.5"?

Let me know....

Thanx
Ken

Kraqa
08-08-2005, 06:35 PM
diameter is around 9.5".

Stan


i think you mean circumfrance

doyll
08-08-2005, 07:21 PM
9.5".. Sound like pontoons to me :mrgreen:

SCAMPER ZJ
08-08-2005, 08:41 PM
diameter is around 9.5".

Stan


i think you mean circumfrance

I think you're right! That's what happens when you're a new father with just two hours of sleep. . . :rolleyes:

doyll
08-08-2005, 08:49 PM
Congradulations Scamper!

SCAMPER ZJ
08-08-2005, 11:27 PM
Thanks! He's a real cute kid - makes his mother and I real proud! Can't wait to get him out wheelin' once he's got some head control. Maybe he'll do some winter wheeling with us. He's only a week old though, so I'm trying to be patient :mrgreen:

He likes it when you rock him on your knee, and he likes the sound of my Jeep. . .all good signs!!

Nined6Grand
08-11-2005, 07:57 PM
Hey Stan...

Sent you a pm....

Ken

SCAMPER ZJ
08-12-2005, 12:22 AM
Hey Stan...

Sent you a pm....

Ken

Got it!!