View Full Version : Beadlock question
Cue-Ball
07-11-2005, 12:35 PM
Call me new but if you are going to go through the time and exspense to run beadlocks shouldn't you run a double beadlock? I mean why run a beadlock for only the outside bead, or is it that the inside bead is not as prone to popping as the outter bead??
jeep4x4nut
07-12-2005, 12:36 AM
i have alwasy wondered the same thing...just seems smarter
LouisianaZJ
07-12-2005, 12:44 AM
if money is no concern go for it
really chances are very slim you will blow a inner bead, thats why most are exterior only
robselina
07-12-2005, 01:25 PM
Only ever had problems with the outer bead on mine. I was thinking double beadlocks but I'm not sure I can run them. You need a pretty big wheel relative to your brake calipers to clear the double beadlock. I'm hoping to do beadlocks on the waggy this winter. If I modify my existing 15" wheels I only fork out $50 a wheel to do DIY beadlocks. If I want to do double beadlocks, I'd need probably 17" wheels to clear my 3/4 ton brakes (I had to grind calipers and backets to fit 15s). That means new tires too and yada yada....Next thing I know I spent $2000 instead of $200....
Cue-Ball
07-12-2005, 01:34 PM
These are the reasons I was asking, I plan on running 15's for now, not even sure I will be doing beadlocks at all just getting some ideas.
Does anyone run beadlocks on their DD, I know they are not DOT legal but do they hold up okay?
norcaljr
07-13-2005, 01:28 AM
Dirk... im running walker evans beadlocks on my ZJ and they have held up fine. The whole DOT thing is a non-issue and has been beat to death on about every 4x forum out there.
If your going to stick with the axles you have now, then a 15'' rim is fine. I went with a 17'' to clear my front brakes.
I was going to go with a double beadlock from Stanzworks
http://www.stazworks.com/rims.html
He will make you a set, any size, backspacing, ect. The only down side I saw was that they were going to be heavy SOB's .
I then was looking into getting beadlocks from Allied Racing.
http://www.alliedrockathons.com/catalogue_sample.htm
they also make some really nice rims.
Then I heard about Walker Evans.
http://www.walkerevansracing.com/beadlocks.wheels
After talking to the guys at Walker Evans Racing, I was sold... and I couldnt say no to the Bling Bling :smt003
Cue-Ball
07-13-2005, 11:33 AM
Thanks Jim,
Right now I am just going to stick with my black steelies, but am just thinking about the future.
As far as axles, I am not really sure what I will end up with as a final solution, the more time I spend reading and talking with people the more I want to do some full width D60's, but for now I need to stay focused and get the HP30/8.8 installed. and run that for a while and go from there.
Thanks all.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.