PDA

View Full Version : 1310 to 1330 (1.125" cap) adapter u-joint



Troy
07-06-2005, 08:57 PM
Anyone know if this is even made - 1310 to 1330 (1.125" cap) adapter u-joint? I have a 5-134x 1310 to 1330 (1.0625" cap) but the true hi9 I got has a 1.125" yoke on it. I'd like to avoid changing out the end of my driveshaft if I can get by with an adapter u-joint (this will be for my spare d-shaft as my new d-shaft will have the 1.125 yoke on it).

Dana's site doesn't show a 1310 to 1330 (1.125" cap)...
http://www2.dana.com/expert/wc.dll?DSD~dedsec~2~13~06~[url]

LouisianaZJ
07-06-2005, 09:00 PM
yes

im pretty sure www.completeoffroad.com has them

if not tomwoods has them for sure

LouisianaZJ
07-06-2005, 09:01 PM
http://completeoffroad.com/wsm/i-1023_u-joint_1310-1330_conversion_106__112.html

Troy
07-06-2005, 09:05 PM
Note the writing underneath the description, "MATES A 1310 YOKE TO A 1330 YOKE (all caps 1 1/16" dia)"

I need the 1 1/8" cap not the 1 1/16" cap. That's what I have on hand from my old chunk and it's a spicer 5-134x purchased through completeoffroad.

Thanks anyway though.

LouisianaZJ
07-06-2005, 09:07 PM
posted the wrong link, check the new one. this one says half are the 1 1/8" and the other two are 1 1/16" is that waht you were looking for?

Troy
07-06-2005, 09:11 PM
Sweet. Thanks. I like ordering stuff from Mike at COR. He's always hooked me up with the right stuff.

Troy
07-06-2005, 09:15 PM
For some reason I was thinking that trunion was a different size but it's just the cap. Brain fart.

phillyzj
07-07-2005, 09:33 PM
napa has them. I bought one that i thought i needed and didn't. 10 bucks shipped and it's yours. never been out of the packaging.