PDA

View Full Version : AL D44 question



UNIMOG69
07-06-2005, 11:47 AM
I car pooled today so I don't have my heep but I need the exact measurements for the 5 lower diff cover bolts on the al44. THX

bill~ns
07-06-2005, 02:02 PM
Same as the top 5... :P

Should be 5/16"x1" coarse thread.

Bill

UNIMOG69
07-06-2005, 02:57 PM
Sorry I should have been more clear. I need the measurements between the bolts not what size the bolts are.

rccolacc
07-06-2005, 05:45 PM
Sorry to thread hijack, but are AL44 covers the same as regular 44 covers? My cover is leaking around the rubber fill plug. I'm thinking of replacing the cover with one from an old Ford 44. Will it fit?
By the way, I looked all over the internet for Dana 44 cover dimensions, but I did not find any. Sorry.
-RC

UNIMOG69
07-06-2005, 06:36 PM
If you have a cover hold it up to yours and you'll know, but from what I have been told no. Nothing for any other 44 is supposed to work in our al44s but you may just want to see if you can get another plug for it, that would be cheaper. Yeah I checked the net as well and found NOTHING.