PDA

View Full Version : Power Window Question



ChipZJ
06-25-2005, 02:13 PM
My friends passanger side window stopped working out of noware. She went out front, and her window was half way down (she left it up when she left.) I took off the panel and found no sort of binding or anything like that. I can hear some wierd scratching noise when I press the "up/down" button.The motor works for a little bit, than cuts out. My guess is going to be motor, but wanted some other kinds of opinions also. BTW its an 01 WJ

TIA

ZJake
07-04-2005, 03:01 PM
Could be the motor or the wiring. Either one can poop out with no notice. My drivers window did teh same thing and Im still playing with it trying to get it to work. I bought a new motor but apparently the wiring went bad too and now I'm trying to rig up a switch to feed just that motor. Sarry to rant. Anyway, take the motor out and straight wire it to a power source. If it won't do anything it could be the wiring. Hope this helps.

ChipZJ
07-06-2005, 03:00 AM
It was the regulator. Thanks for your reply