PDA

View Full Version : What to do with fresh air inlet hose?



Troy
06-05-2005, 01:29 PM
I just installed a conical air filter (prep work for installing the new ps pump).

What should I do with the cylinder head "fresh air inlet hose"? Should I try to find a filter to fit it or can I just plug it up?

Swamp boy
06-05-2005, 06:10 PM
I have a filter from Crappo Zone on mine ...WOrks fine..

TrojanMan
06-05-2005, 10:06 PM
Mine is just hanging out in the middle of nowhere. I'm gonna buy one of those valve breather things when I get the spare $$$. You don't really need it.

jdoom
06-06-2005, 04:22 PM
I just plugged mine into my new tube when i made my intake. I bought an adapter from ace hardware and just threaded it into the pipe then shoved the tube onto that adapter. You can't really tell in this pic because it's on the other side, it's all i got.

http://i6.photobucket.com/albums/y240/doomer04/Image00004.jpg

I would say a cheap breather filter would be the easiest route and should work just fine.

slomatt
06-07-2005, 05:32 PM
I found a barb at the hardware store for about a buck that worked perfectly, just needed to expoxy one end into the pipe.

http://www.blankwhitepage.com/gallery/zj_intake/IMG_2796

Oh, on a side note. I just cleaned my filter this morning, mud was running out of it, need to clean it more often apparently.

- Matt

Troy
06-07-2005, 08:12 PM
Oh, on a side note. I just cleaned my filter this morning, mud was running out of it, need to clean it more often apparently.

I picked up one of those K&N pre-filters and will be running it to help out.