PDA

View Full Version : AZ : SALE OF THE CENTURY...everything 40-50% off.



RufftyTuffty
05-26-2005, 12:19 PM
Well here it is folks the parting out list you have all been waiting for :

Key parts
Ford 8.8 rear, 4.88, ARB, 31 spine, Crane cover...........................$1,000
Transmission 44RE, 2,000m, HD COTTMAN build...........................$900
HOWE HP pump, pulley & resevoir.......................................... .....$350
Driveshaft front x2, 1310 joints, need new CV pins.......................$200
Driveshaft reat x1, 1301 joints............................................ ........$100
HDPE armour, 8 pieces............................................ ...................$100*
Skid plates, custom tcase & tranny (require welding).....................$200
Seats, Dark gray leather........................................... ..................$200*
Gas tank, cw/ sender & pump.............................................. ........$200
5x5.5 adpaters 1" thick............................................. ..................$70
HD drop pitman arm............................................... ...................$50*
RK 7 Springs x4, 6-7" lift.............................................. ..............$150
K&N FIPK.............................................. ....................................$100*
Lexan quarter panel windows, pair.............................................. .$70*
Premium JEEP slush mats, F&R, Agate..........................................$50
Headlights cw/markers and turn (1 turn broken)...........................$40/ea
Interor door panels x4, Grey.............................................. ........$20/ea
Front door glass............................................. ............................$50/ea
Rear door glass............................................. .............................$50/ea
Window motors/track............................................. .....................$40/ea
ECU computer, 5.2L V8................................................ ...............$90

PENDING
3 core CSF radiator & tank.............................................. ...........$80
TR front bumper............................................ .............................$300
TR rear bumper, with hitch............................................. .............$400

SOLD
Winch
LA links
Yellow top
DL & TR
Ram
ACOS x4
Tail lights x2
ARB compressor
PSC HD Box & stock pitman
Beadlocks x4, 15x8 Trailready, 5x5.5, 3.5 BS
Engine V8 5.2L, 63,000m
HD 231, includes bezel
TERA 60 front, 4.88, ARB, 35 spline, highsteer arm
Tires x4, 36x12.5x15 SX's
5x4.5 spacers 1.25" thick
Hood & venst
Rancho 9000X shocks cw/ in cab, compressor, JKS adapters


All prices are plus S&H.


PAYMENT : DIRECT DEPOSIT, PAYPAL, WIRE/TELEX or good old CASH.

~Mike

OverkillZJ
05-26-2005, 12:37 PM
Why oh why don't you live closer...

zjjeeper33
05-26-2005, 01:10 PM
shipping on the arb compressor to 17356

RufftyTuffty
05-26-2005, 01:49 PM
shipping on the arb compressor to 17356

I will take it off on SUN and get you a $ ASAP.

Includes 2 solenoids, switches, wire & air lines..if you want them?

~Mike

RufftyTuffty
05-26-2005, 01:55 PM
I have been asked about the detail specs on the 60...here they are :

TERA 60R housing cw/ HD tubes and cover
Kingpin design
61 WMS
35 spline inner & outer
WARN premium hubs (lifetime warranty)
4.88 gears
ARB
5x5.5 spacing
3/4T disk brakes (15in wheels fit)

Did i miss anything?

~Mike

97trxuszj
05-26-2005, 03:30 PM
How about the ACOS shipped to 98092 WA, also curious if you would split up the skids, I am interested in the stock gas skid

nathaniel
05-26-2005, 03:57 PM
passenger rear quarter glass.

deadman
05-26-2005, 04:23 PM
I'll take the fipk. *thinkin about the driveshafts*

RufftyTuffty
05-26-2005, 05:34 PM
passenger rear quarter glass.

Ummm...both the rear quarter panels are clear LEXAN now....

Check out the for sale pics here :

http://mikesjeeping.com/ForSale

FYI...I'm told that you can buy spray on tint.

~Mike

Cue-Ball
05-26-2005, 05:58 PM
How about the ACOS shipped to 98092 WA, also curious if you would split up the skids, I am interested in the stock gas skid

I might be interested in the TC and Tranny skids.

Jim311
05-26-2005, 06:29 PM
Son of a bitch. NOW you sell the motor, after I hydrolock mine and just get a new one in. I paid twice that for one with 80k on it! Wish I had the money to buy some parts from you, but alas, I am broke.

zj95
05-26-2005, 11:39 PM
i got first dibs on the motor.

check your pm box!!

SuicideTireZJ
05-27-2005, 12:06 AM
Is the rear bumper gone?

nathaniel
05-27-2005, 12:33 AM
passenger rear quarter glass.

Ummm...both the rear quarter panels are clear LEXAN now....

Check out the for sale pics here :

http://mikesjeeping.com/ForSale

FYI...I'm told that you can buy spray on tint.

~Mike
I know what they are but didn't notice that you put screws in them :smt010 Wanted to toss them in mine and tint them but not sure about the screws. Send me a pic of them upclose

RufftyTuffty
05-27-2005, 10:55 AM
Tcase dids
jsteves
halfdoc
Chadjans

The most important thing is i'm using as a second DD (70m round commute :rolleyes:)...i am looking at trucks now and should have one within a week. I need the 'new' truck before i can strip anything essential :smt003

But keep the dibs coming in...the wrenching will begin next week.

~Mike

RufftyTuffty
05-27-2005, 11:02 AM
passenger rear quarter glass.

Ummm...both the rear quarter panels are clear LEXAN now....

Check out the for sale pics here :

http://mikesjeeping.com/ForSale

FYI...I'm told that you can buy spray on tint.

~Mike
I know what they are but didn't notice that you put screws in them :smt010 Wanted to toss them in mine and tint them but not sure about the screws. Send me a pic of them upclose

Sure will...the screws are really close to the edges, it was too hard to salvage the stock surround so we decided to either screw of rivet them, we had ran out of rivets so.......i was goning to re-rivet them and paint the rivet heads black FYI.

~Mike

RufftyTuffty
05-27-2005, 11:03 AM
Is the rear bumper gone?

You are second.

nathaniel
05-27-2005, 01:38 PM
passenger rear quarter glass.

Ummm...both the rear quarter panels are clear LEXAN now....

Check out the for sale pics here :

http://mikesjeeping.com/ForSale

FYI...I'm told that you can buy spray on tint.

~Mike
I know what they are but didn't notice that you put screws in them :smt010 Wanted to toss them in mine and tint them but not sure about the screws. Send me a pic of them upclose

Sure will...the screws are really close to the edges, it was too hard to salvage the stock surround so we decided to either screw of rivet them, we had ran out of rivets so.......i was goning to re-rivet them and paint the rivet heads black FYI.

~Mike

Would the stock surround cover the screws?

97trxuszj
05-28-2005, 03:22 AM
what about those acos ?

SuicideTireZJ
05-28-2005, 04:05 PM
Is the rear bumper gone?

You are second.

Cool thanks, keep me posted.

jdoom
05-28-2005, 04:58 PM
Also interested in the gas skid plate.

Jim311
05-28-2005, 06:54 PM
Put me second in line for that motor. If it turns out this salvaged motor is trashed I'm going to need one fast.

AprilzWarrior
05-28-2005, 10:06 PM
PM SENT...


Please hit me back... Ill pay Tuesday Fed Ex Over Night !


Jerod

Cue-Ball
05-29-2005, 12:17 AM
PM SENT...


Please hit me back... Ill pay Tuesday Fed Ex Over Night !


Jerod

What are you trying to buy??

AprilzWarrior
05-29-2005, 01:00 AM
PM SENT...


Please hit me back... Ill pay Tuesday Fed Ex Over Night !


Jerod

What are you trying to buy??

Lets not waste his thread with this....


Its confidential anyway !

RufftyTuffty
05-29-2005, 11:31 AM
PM SENT...


Please hit me back... Ill pay Tuesday Fed Ex Over Night !


Jerod

Been REAL busy getting a new DD....i finally got one on Friday.

Now that i can start parting RT out...i will read all the PM/posts and get things going.

If i recall there is someone else who already has dibs...but that might even be you!!!

RT is at the DD dealers carpark...i'm collecting TUE.

~Mike

AprilzWarrior
05-29-2005, 08:24 PM
PM SENT...


Please hit me back... Ill pay Tuesday Fed Ex Over Night !


Jerod

Been REAL busy getting a new DD....i finally got one on Friday.

Now that i can start parting RT out...i will read all the PM/posts and get things going.

If i recall there is someone else who already has dibs...but that might even be you!!!

RT is at the DD dealers carpark...i'm collecting TUE.

~Mike


Ready and waiting !


Just let me know where to send payment and you got it !


Thanks
Jerod

deadman
05-30-2005, 08:08 AM
I'll take the fipk. *thinkin about the driveshafts*

Sorry, I need all my money for a new dd now... second in line can have it.

Rock Limo
05-30-2005, 02:25 PM
Been REAL busy getting a new DD....i finally got one on Friday.

Now that i can start parting RT out...i will read all the PM/posts and get things going.

If i recall there is someone else who already has dibs...but that might even be you!!!

RT is at the DD dealers carpark...i'm collecting TUE.

~Mike


Pm'd you both on here and JU about the coils, very interested and need them asap. Please get back to me, thanks! (rckcrwlnzj on JU)

Chris J.
05-30-2005, 04:31 PM
Pm'd you!

AprilzWarrior
05-31-2005, 12:01 AM
Not sure if you got my Pm on JU ?


But all I need is your Addy for the fed ex guy !



:partyman:

RufftyTuffty
05-31-2005, 12:11 PM
Got the new DD on Friday....i will be picking up RT tonight and then jacking in up and stripping axles, suspension and stuff this week.

I will email buyers pics when the parts are off.

~Mike

AprilzWarrior
05-31-2005, 05:49 PM
Got the new DD on Friday....i will be picking up RT tonight and then jacking in up and stripping axles, suspension and stuff this week.

I will email buyers pics when the parts are off.

~Mike


I dont need a pic... I know what they look like !


AW

blackjak71
06-01-2005, 12:08 AM
let me get dibs on all the skids

RufftyTuffty
06-01-2005, 11:09 AM
let me get dibs on all the skids

Currently 2 members want to split the skids between them if they fall throught your next.

Got it on jack stands now, to do list :

Take tires off beadlocks : Sell beadlocks
Take off skids : Sell
Drop Tase : Sell
Drop front & rear axles : Sell springs, shocks, ACOS
Take off ARB Comp and FIPK : Sell

~Mike

1v6pony
06-01-2005, 11:16 AM
I sent you a PM but, I really need a T-case, I have a 249 that is shoot and I am running in 2 wheel drive. What model is it? I would like something else beside the 249, Does it need any special fab for a mostley stock rig?

I am in Arizona could pick it up.

AprilzWarrior
06-01-2005, 01:05 PM
let me get dibs on all the skids

Currently 2 members want to split the skids between them if they fall throught your next.

Got it on jack stands now, to do list :

Take tires off beadlocks : Sell beadlocks
Take off skids : Sell
Drop Tase : Sell
Drop front & rear axles : Sell springs, shocks, ACOS
Take off ARB Comp and FIPK : Sell

~Mike


Great... progress :partyman:

Here is my Zip BTW 94551 Ready with $

Cue-Ball
06-01-2005, 01:28 PM
I am going to pass on the skids.

Nined6Grand
06-01-2005, 01:37 PM
pm'ed you about front bumper

screendoor41
06-01-2005, 06:11 PM
Does the T-case include the linkage? Will this case bolt into my 94 with no out any driveline modification? Thanks

jdoom
06-01-2005, 10:20 PM
Still interested in the gas tank skid.

screendoor41
06-01-2005, 11:29 PM
PMed you about Transfer case.

blackjak71
06-03-2005, 04:37 PM
if jdoom changes his mind ill take em, id rather get em all that just the 2

AprilzWarrior
06-04-2005, 10:28 AM
Updates ?

Rock Limo
06-04-2005, 11:43 PM
Updates would be great, I need to know whether those coils are mine or if I should shop elsewhere....

SuicideTireZJ
06-05-2005, 02:51 AM
Yeah, updates would be pimp.

Still wating to hear about the rear TR bumper... as much as I don't wanna borrow more from my credit card I really need a damn bumper.

And a roadtrip just feels right!

RufftyTuffty
06-05-2005, 12:38 PM
Still interested in the gas tank skid.

I'll work out shipping for ya this week.

~Mike

RufftyTuffty
06-05-2005, 12:39 PM
Yeah, updates would be pimp.

Still wating to hear about the rear TR bumper... as much as I don't wanna borrow more from my credit card I really need a damn bumper.

And a roadtrip just feels right!

Will take the bumpers off this week.

~Mike

RufftyTuffty
06-05-2005, 12:41 PM
if jdoom changes his mind ill take em, id rather get em all that just the 2

You've got the 2 custom skids...these will require some welding to attach the mounts.

~Mike

Chris J.
06-05-2005, 12:41 PM
Am I still first in line for the front bumper? got cash for you!

RufftyTuffty
06-05-2005, 12:45 PM
Updates ?

Essential running gear has been delayed....i've just been told that i might be going to VA on business on a tempoary basis.

This would make the stripping a hard/impossible task over then next few months.

SO...i spoke to my local shop and i'm currently negioating a complete strip price with him....I WILL KNOW BY WED.

Thanks for all you patience....IT WILL happen but it may not be overnight.

~Mike

RufftyTuffty
06-05-2005, 12:47 PM
Am I still first in line for the front bumper? got cash for you!

The front is in the 'worse' shape of the two bumpers...i will tidy it up but you understand it has been USED right?

~Mike

Chris J.
06-05-2005, 12:51 PM
Yup. I took a good close look at the pics. It'l look fine on my mad-max mobile, once I weld some more chunks on it! :smt003

blackjak71
06-05-2005, 01:47 PM
im gonna have to withdraw my bid on the two skids, thanks anyways

Rock Limo
06-05-2005, 03:42 PM
I am still in on the coils just le me know when.... :partyman:

jdoom
06-05-2005, 04:40 PM
Shipping for gas tank skid, 67218.

Jcbzj
06-06-2005, 02:47 PM
you got the springs and shocks off yet? Im ready to send money whenever you are, i need to get my junk back together

RufftyTuffty
06-06-2005, 02:57 PM
Ok more progress....agreed a good strip rate with the local shop as it looks like i will travelling on business for a bit.

It should be a bare tub by this w/e.

Get ready for the shipping quotes :partyman:

~Mike

AprilzWarrior
06-06-2005, 08:52 PM
Ok more progress....agreed a good strip rate with the local shop as it looks like i will travelling on business for a bit.

It should be a bare tub by this w/e.

Get ready for the shipping quotes :partyman:

~Mike

Thanks Mike.. Ready and waiting !


AW

wackodrumr
06-07-2005, 10:50 PM
Hey, I want 2 of your ACOS spacers. Serious. PMed you

RufftyTuffty
06-08-2005, 11:58 PM
First bed load back from the shop.

http://mikesjeeping.com/albums/ForSale/Load_1_Jun_050001.sized.jpg

I will print out everyone's dibs and zips tomorrow at work and i'll get 2-3 S&H a day going.

~Mike

AprilzWarrior
06-09-2005, 10:34 AM
Great !!


Thanks for the PM, and replied !


Jerod

RufftyTuffty
06-09-2005, 07:32 PM
PM'ed just about everyone.

Still on plan EVERYTHING should be off by Monday.

Who wants to buy a 2' square Grand :yawinkle:

~Mike

Jcbzj
06-09-2005, 08:27 PM
I want the springs and shocks if they are available

97trxuszj
06-09-2005, 09:31 PM
How about all 4 acos someone still in front of me for all 4?

AprilzWarrior
06-09-2005, 09:42 PM
How about all 4 acos someone still in front of me for all 4?

Yup... still working out details...


AW

97trxuszj
06-10-2005, 04:22 PM
DAMN let me know if it doesn't work out

AprilzWarrior
06-10-2005, 05:18 PM
DAMN let me know if it doesn't work out

Im trying to just get an address where to send the $ but I have not heard back !?!?!?!?



Mike, Please contact me... Madman2@sbcglobal.net I need your ADDRESS...



Jerod

SuicideTireZJ
06-11-2005, 03:43 AM
Am I still second in line for the rear Trailready?

'Cause God damn I need that thing!

RufftyTuffty
06-13-2005, 02:00 PM
Mike, Please contact me... Madman2@sbcglobal.net I need your ADDRESS...Jerod

PM'ed ya.

RufftyTuffty
06-13-2005, 02:04 PM
Am I still second in line for the rear Trailready?

'Cause God damn I need that thing!

The other guy was asking after a bumper...he didn't say which and now he's not replying.

So, your up...there is a Forward air in Denver...i'll get the rates today.

~Mike

dasVettemeister
06-13-2005, 02:10 PM
What's the status of the front TR bumper?

RufftyTuffty
06-13-2005, 05:21 PM
What's the status of the front TR bumper?

Well, apparantly Forward Air wants ALL autoparts crated...so i have a shipping problem.

Anyone know of a palette shipper?

Your 2nd on the Front TR depending on if i can find a shipper.

~Mike

AprilzWarrior
06-13-2005, 08:55 PM
Deposit made for the ACOS...


Thanks
Jerod

SuicideTireZJ
06-13-2005, 09:20 PM
If you can find a shipping rate let me know.

It might be a bit cheaper for me to just marathon it down there instead.

Where in AZ are you located, and would you take $375 if you didn't have to go through getting it packed up to ship?

zjjeeper33
06-14-2005, 02:00 PM
still wandering on shipping on the arb compressor to 17356

dasVettemeister
06-14-2005, 03:34 PM
still wandering on shipping on the arb compressor to 17356

Where are you wandering to? :smt003

RufftyTuffty
06-14-2005, 03:41 PM
still wandering on shipping on the arb compressor to 17356

Sry dude...i've been trying to find a freight forwarder the last couple of dayz....my bad :axe:

I will take it to UPS tomorrow along, with the springs, shocks & Tcase.

~Mike

RufftyTuffty
06-14-2005, 03:48 PM
If you can find a shipping rate let me know.

It might be a bit cheaper for me to just marathon it down there instead.

Where in AZ are you located, and would you take $375 if you didn't have to go through getting it packed up to ship?

S&H is/has always been extra on the cost.

I'm in Mesa (Phoenix)...dude it's 1,000m :rolleyes:

If you're serious and really want it and you're driving 1,000m miles to get it....it's yours for $400 even.

~Mike

RufftyTuffty
06-14-2005, 03:59 PM
All,

I still can't find a palette shipper....so unless anyone has got any better ideas shipping will be limited to 100lbs via UPS $$$.

So, unless you can organize you own shipping for the big stuff...i feel that this will have to be sold locally.

~Mike

UNIMOG69
06-14-2005, 04:39 PM
Curious, how much for the hood vents and the tranny skid?

JeepinHank
06-14-2005, 04:45 PM
Check out R&L Carriers.. http://www.rlcarriers.com

They've got a terminal right down from my house. I get stuck behind their trucks pretty regularly and it appears, from the coverage area shown on the back of their trucks, they service just about the entire continental US (Excluding CA, OR, WA, and NV)

I don't know what their rates are, and have no idea what kind of policy they have on small customers, but its worth a look...

JH

RufftyTuffty
06-14-2005, 04:55 PM
Curious, how much for the hood vents and the tranny skid?

Vents $30
Tranny skid $100 (requires welding of tabs)

~Mike

UNIMOG69
06-14-2005, 05:18 PM
Curious, how much for the hood vents and the tranny skid?

Vents $30
Tranny skid $100 (requires welding of tabs)

~Mike

Do you have ant pics of how the vents are mounted on your hood? THX

UNIMOG69
06-14-2005, 05:18 PM
Do you have ant pics of how the vents are mounted on your hood? THX[/quote]

Fron under the hood. THX

RufftyTuffty
06-14-2005, 06:02 PM
Do you have ant pics of how the vents are mounted on your hood? THX. Fron under the hood. THX

No pic yet...but basically you cut a hole just big enough for the vent and then drill holes around it that line up with the studs (6-8 i think) and bolt the vent too the hood.

These are the vents from Kolak.

~Mike

AprilzWarrior
06-14-2005, 06:07 PM
They mount somthing like this...

http://fototime.com/AD38FC1C306B900/standard.jpg


Those are the same ones Kolak sells...



FYI ACOS are sold !! LOL :partyman:

UNIMOG69
06-14-2005, 06:15 PM
Am I the only mo fo who cant see pics. I see nothing but
-



-



-
running down the side of the page. THX

jdoom
06-14-2005, 06:23 PM
Gas tank skid ready to be shipped?

SuicideTireZJ
06-14-2005, 06:52 PM
R/T

I've taken a trip to Milwaukee and back in less than 72 hours (with a 6 hour stop to gamble in Minnesota: 18 and up tables!!!) to pick up a motorcycle, so getting down there wouldn't be much of a problem. That was like 3200 miles round trip. Let me see if I can get two consecutive days off work within the next couple weeks and I'll put a trip together. Might not be for a little while because I'm pretty much the office bitch at the moment, so if you can sell locally, go for it. But don't forget about me. I'll let you know.

~Sean

UNIMOG69
06-14-2005, 07:01 PM
I want the hood vents. I'll let you know about the tranny skid. THX

RufftyTuffty
06-14-2005, 07:15 PM
Gas tank skid ready to be shipped?

Apparantly it got tossed by the shop...sry dude...certainly gonna have words with the shop :axe:

~Mike

RufftyTuffty
06-14-2005, 07:19 PM
I know what they are but didn't notice that you put screws in them :smt010 Wanted to toss them in mine and tint them but not sure about the screws. Send me a pic of them upclose

Still want a pics?

~Mike

jdoom
06-14-2005, 07:35 PM
That sucks for both of us, I'm out a skid and your out $100. Oh well.
:butthead: :finga: :axe: That's for the shop you went to.

Jim311
06-14-2005, 09:06 PM
So what exactly is sold, and what is still up for grabs?

Jcbzj
06-14-2005, 09:20 PM
So are the springs and/or shocks still available?

ATL ZJ
06-14-2005, 11:07 PM
Can I get the pitman arm? If it's still attached to teh box, that's fine, I'll take it all. Let me know what you want if it's available, thanks.

RufftyTuffty
06-15-2005, 09:28 AM
What once was....is no more :smt009

http://mikesjeeping.com/albums/ForSale/Shell_Jun_050001.sized.jpg

Please see the 1st post on what's still for sale....i will move the pending stuff so that you can see.

~Mke

UNIMOG69
06-15-2005, 09:34 AM
Just for shits and giggles, how much for the hood? THX

RufftyTuffty
06-15-2005, 09:35 AM
Can I get the pitman arm? If it's still attached to teh box, that's fine, I'll take it all. Let me know what you want if it's available, thanks.

:finga: So...your after a pitman only or do you want the PSC HD box as well?

Stock arm right?

~Mike

RufftyTuffty
06-15-2005, 09:38 AM
Just for shits and giggles, how much for the hood? THX

Hood and vents all for $70

~Mike

RufftyTuffty
06-15-2005, 09:42 AM
So are the springs and/or shocks still available?

I will be getting your shipping quote today on the shocks....someone is infront of you for the springs.

The shocks btw are the 9012...the long bastards...34" extended and 20" compressed with 13.8" of travel :rolleyes:

They will come with the compressor and controller...but you'll have to get a plumbing kit from Rancho...the old one was toast.

~Mike

ATL ZJ
06-15-2005, 05:36 PM
Can I get the pitman arm? If it's still attached to teh box, that's fine, I'll take it all. Let me know what you want if it's available, thanks.

:finga: So...your after a pitman only or do you want the PSC HD box as well?

Stock arm right?

~Mike

OOH, yes I would be interested in the box possibly, depending on the price. Is the pitman reamed for Chevy 3/4 ton ends already? PM me with the price and a little info about how much wear is on it and also the age of the box, and whether it's the one tapped for hydro assist or not, and if it has the 14:1 ratio. :smt003 Thanks, and sorry about all the questions.

Jcbzj
06-15-2005, 06:53 PM
So are the springs and/or shocks still available?

I will be getting your shipping quote today on the shocks....someone is infront of you for the springs.

The shocks btw are the 9012...the long bastards...34" extended and 20" compressed with 13.8" of travel :rolleyes:

They will come with the compressor and controller...but you'll have to get a plumbing kit from Rancho...the old one was toast.

~Mike

Alright sounds good, just let me know

AprilzWarrior
06-18-2005, 06:36 PM
Mike thanks for the EASY transaction !!!!



I got the ACOS & they are installed....



THANKS !
Jerod

Cue-Ball
06-18-2005, 07:32 PM
Mike thanks for the EASY transaction !!!!



I got the ACOS & they are installed....



THANKS !
Jerod

Now I think it's time for you to work on your long arms. :mrgreen:

UNIMOG69
06-19-2005, 01:49 PM
I am looking at your pics and have noticed that your upper front track bar mount is still attached to the carcass. Does it use the stock mount holes? If so could I get a measurement for the width between the bar mount holes and a price? THX.

Ps payday is Wednesday.

RufftyTuffty
06-19-2005, 08:10 PM
I am looking at your pics and have noticed that your upper front track bar mount is still attached to the carcass. Does it use the stock mount holes? If so could I get a measurement for the width between the bar mount holes and a price? THX.

Ps payday is Wednesday.

Carcass is now crushed....:mrgreen:

You still want the hood and vents right?

~Mike

RufftyTuffty
06-19-2005, 08:13 PM
Ok the following will be UPS quoted tomorrow :

231
radiator
K&N
springs
PSC box

Also...the shocks are ready....i have thrown in some JKS shock converts as you'll need them.

And....the TR beadlocks are now $500 ...that's $125/ea....these badboyz are $225 new.

~Mike

UNIMOG69
06-20-2005, 09:18 AM
Yeah after Wednesday. Is the lift gate gone as well? THX

RufftyTuffty
06-20-2005, 02:30 PM
Yeah after Wednesday. Is the lift gate gone as well? THX

Yes...a pair of headlights and 4 doors are the only things not listed in the 1st post.

The door skins are toast but the glass and electric window stuff is good.

Oh...door handles as well but no mirrors ;)

~Mike

UNIMOG69
06-20-2005, 02:50 PM
how much for the front pass. window motor? where in Mesa are you? THX

Cue-Ball
06-20-2005, 03:40 PM
Yeah after Wednesday. Is the lift gate gone as well? THX

Yes...a pair of headlights and 4 doors are the only things not listed in the 1st post.

The door skins are toast but the glass and electric window stuff is good.

Oh...door handles as well but no mirrors ;)

~Mike

How do the headlights look, are they pretty clear??

RufftyTuffty
06-20-2005, 04:07 PM
PM'ed everyone who was waiting for shipping $'s.

CUE-BALL : I'll clean the headlights up and have a look for ya...or even take a pic.

UNIMOG : Window motor will be $40

~Mike

Cue-Ball
06-20-2005, 04:09 PM
Mike,

Take a look at them and let me know what you think, if they are already starting to yellow then not really interested, since I am already running ones like that, but if they look pretty clean might be interested.

Dirk

UNIMOG69
06-20-2005, 05:04 PM
Thanks I'll be in touch.

UNIMOG69
06-22-2005, 10:34 AM
PMed you. THX

jeep4x4nut
06-23-2005, 12:50 AM
how much for your sliders?

2KFLEXJ
06-23-2005, 07:52 AM
What would it take to ship those wheels out to NC 27284?

RufftyTuffty
06-27-2005, 12:42 PM
Price drops on big ticket items...btt

Was in VA all last week so not much progress...i'm back in AZ this week so check for PM's.

~Mike

SuicideTireZJ
06-27-2005, 04:46 PM
I still really want that rear TR, just having a hell of a time getting out there.

Any word on shipping or is that a no-go? If not, might have to pass unless you don't sell it before August...

RufftyTuffty
06-29-2005, 12:02 PM
No luck on the shipping of large/heavy items...tried R&L carriers and they are expensive.

Have you tried your end?

From 85219.

~Mike

RufftyTuffty
06-30-2005, 04:48 PM
Justin (Tcase) PM'ed ya.

It's all ready to go.

~Mike

Jim311
06-30-2005, 06:52 PM
Front bumper already sold? How about that 231?

DixieZJ
06-30-2005, 10:39 PM
do you still have the tranny/tc skids? any up close pics of how you mounted it?
and what about the psc pump? a little info about it and whether it's the one tapped for hydro assist or not, and if it has the 14:1 ratio.

RufftyTuffty
06-30-2005, 11:21 PM
Front bumper already sold? How about that 231?

Bumper not yet.

231 prolly yes by tomorrow.

~Mike

RufftyTuffty
06-30-2005, 11:23 PM
do you still have the tranny/tc skids? any up close pics of how you mounted it?
and what about the psc pump? a little info about it and whether it's the one tapped for hydro assist or not, and if it has the 14:1 ratio.

I will take some pics of the skids off....basically they mounted to the crossmember via 2 tabs each and 1 tab via a diagronal brace to the drivers frame rail.

You'll need to cut and weld on your own tabs...but these skids are solid, they will easly support the jeeps weight.

The PSC steering box is sold....but i still have the HOWE pump & res cw/ hoses.

~Mike

Jim311
07-01-2005, 05:28 PM
Front bumper already sold? How about that 231?

Bumper not yet.

231 prolly yes by tomorrow.

~Mike

Anybody in line for the front bumper? Shipping is probably mad expensive, and thus nobody has picked it up? Any idea how much forward air to Jacksonville would be?

RufftyTuffty
07-13-2005, 05:06 PM
Please try and find shipping for the big stuff....i have no problem dropping it off.

~Mike

Jim311
07-13-2005, 08:26 PM
Damn man.. are you near a forward air terminal? I thought I could pull strings with Yellow or R+L carriers, but I don't think it will be cost effective. If I buy a bumper from you, I want to buy both. Any idea how much it will cost to ship forward air to the Jacksonville terminal? Or even truck freight to a commercial address near 32653? I've got a loading dock and forklift at work...

RufftyTuffty
07-14-2005, 12:57 PM
Damn man.. are you near a forward air terminal?

Yes (Phoenix)...i can drop them off easy enough.


I thought I could pull strings with Yellow or R+L carriers, but I don't think it will be cost effective.

Yeah...R&L quoted me $2xx for one bumper.


If I buy a bumper from you, I want to buy both.

First one with the $$$ takes em.


Or even truck freight to a commercial address near 32653?

I'll call my local shop to see if he'll ship them for us.

~Mike

Jim311
07-18-2005, 10:58 PM
Still waiting to hear from you about those bumpers man.. I'm ready to buy...

RufftyTuffty
07-19-2005, 06:35 PM
PM'ed everyone :partyman:

~Mike

hoffyinaz
07-21-2005, 06:52 AM
any front lights available

Jim311
07-30-2005, 01:34 PM
So what's up with these bumpers? Haven't heard anything from you in a while...

RufftyTuffty
08-03-2005, 06:08 PM
So what's up with these bumpers? Haven't heard anything from you in a while...

Hey Jim....yeah last week was a crazy work week.

This week is looking better...should have a firm $ for ya soon.

~Mike

Jim311
08-04-2005, 01:45 AM
So what's up with these bumpers? Haven't heard anything from you in a while...

Hey Jim....yeah last week was a crazy work week.

This week is looking better...should have a firm $ for ya soon.

~Mike


Great, let me know. I'm in no rush really. Just wanna get to Tellico in December with some real protection and a winch :D

97trxuszj
08-04-2005, 04:23 PM
what else do you have up that hasn't been sold

bruce
08-05-2005, 07:46 AM
Mike,

Does the TR rear have a tire carrier?

RufftyTuffty
08-08-2005, 12:36 AM
what else do you have up that hasn't been sold

See the first post on this thread...i keep it updated.

~Mike

RufftyTuffty
08-08-2005, 12:37 AM
Mike,

Does the TR rear have a tire carrier?

No...also both bumpers are as good as sold...shipping pending.

~Mike