PDA

View Full Version : Waggy steering box



Trancezj
05-19-2005, 11:48 AM
I know it's not the best box to run, but I will have one for basically nothing. Will it work? I havent' picked up the waggy yet so I've not looked at it. Plus I just had to weld a crack on my box so I could use a replacement.

ATL ZJ
05-19-2005, 01:49 PM
I am 90% sure that the pitman will slide right on and bolt up. If not, you can just use the Waggy pitman.

You'll have to drill the 4th hole in the framerail, but other than that, it should go in nicely.

Trancezj
05-19-2005, 03:34 PM
sweet thanks.

nate
05-19-2005, 06:16 PM
Actually you need to fab up a spot for that 4th hole, because there is no frame rail where it bolts to.

Kraqa
05-19-2005, 06:36 PM
iis the waggy box similar to the j20 box?

nathaniel
05-19-2005, 11:14 PM
iis the waggy box similar to the j20 box?

it's what I'm currently using. 4 bolts not sure on the ratio but it seems to be about the same ratio as stock. maybe a little different. Mine was out of an 81 Cherokee Chief. everything bolted right up except the part where the small steering shaft bolts up I had to hack a little nipple off of that was right in the middle of it.

nate
05-20-2005, 01:17 PM
You know, I'm not sure. I was thinking of a J20 box, which is what I have in my ZJ... got mixed up :axe: haha.


iis the waggy box similar to the j20 box?

UGLEZJ
05-25-2005, 01:28 AM
The Waggy box will bolt right up. I found a Saginaw that was a 3 hole and it slipped right in in just about 15 minutes into my ZJ.