PDA

View Full Version : Cruise control dead



2drezq
04-28-2005, 03:06 PM
I realize most of you have forgotten what cruise control is for on your ZJs, but I still use mine, or rather, I would if it still worked. The fuse is fine, it just doesn't engage at all. Any ideas? (94' model)

OverkillZJ
04-28-2005, 03:09 PM
Clock spring? Vacume leak in line going to the actuator?

Moving this to repair shop too :)

2drezq
05-15-2005, 10:19 AM
Vacuum line is fine. Uhhh...Clock spring? (Trying not to look dumb here...)

Swamp boy
05-15-2005, 11:27 AM
Are you sure all the vacuum lines are good..

How does your air conditioning work... At one time my Cruise went out and my air vents would open and close at will (Usually open on acceleration and close with sudden stop or going down hill..) Turned out to be the stupid hard line that controls the blend door.. IT also has something to do with the cruise (probobly share a common vacuum sorce..) But when I fixed the A/C it fixed the cruise...

I dont have A/C anymore but I do still use my Cruise... I have spent alot of time and energy maintaining my cruise..

This is my current steering wheel...
http://images.igloos.ca/d/78473-1/fc781700.jpg

And here are my controls for my cruise..
http://images.igloos.ca/d/78475-1/fc76b215.jpg


My interior doesnt look like that anymore but the cruise is still there and still works... :smt003

Swamp boy
05-15-2005, 11:28 AM
Ahahahahaha... I just noticed .. I still had a 249 in that picture...

This is for you 249. :drinkers:

TrojanMan
05-15-2005, 01:37 PM
Mine is going to crap, you have to hold the on button for a little while, but after that it works normally. Try holding it down.

2drezq
05-19-2005, 01:11 PM
A/C & vents all work fine. A/C defaults to the defrost vents after 4-5 seconds HARD acceleration, or long uphill pulls, when the vacuum gauge drops to zero. It pulls 17" at idle. I'll try disco & pulg the cruise line to see if the vac changes.

shortys ZJ
05-19-2005, 04:32 PM
On a different subject, Swamp boy how did you take your steering wheel off? I need to get rid of mine it is deteriating and I would like to replace it with an aftermarket one.