lumpybluezj
03-04-2005, 01:18 AM
I have been looking for diff.s to upgrade 96 zj...I have found a 81 powerwagon 3/4 ton for free.
the pick-up has front diff. with the wrong side drive shaft, I was going to start to cut tubes and re-weld them to correct the problem but I got a thought
the transfer case in the truck has no numbers on it but it has a PTO on it.so I don't know for sure what it is but either a np205 or 208
the zj has a t-case that only has 4h-n-4l doesn't slip in low range but high range doesn't alow much torque to front axel.
I am thinking maybe i should just swap the transfer case with the diff.s but i don't know if the t-case will bolt onto the transmition?
also what size diff.s would normally be in a '81 power wagon 3/4 ton?
the pick-up has front diff. with the wrong side drive shaft, I was going to start to cut tubes and re-weld them to correct the problem but I got a thought
the transfer case in the truck has no numbers on it but it has a PTO on it.so I don't know for sure what it is but either a np205 or 208
the zj has a t-case that only has 4h-n-4l doesn't slip in low range but high range doesn't alow much torque to front axel.
I am thinking maybe i should just swap the transfer case with the diff.s but i don't know if the t-case will bolt onto the transmition?
also what size diff.s would normally be in a '81 power wagon 3/4 ton?