PDA

View Full Version : Ford HP44/9" - Ready To Bolt In - Histeer



Raacerx
02-27-2005, 09:46 PM
Since Im not getting many hits on selling my whole Jeep, Im thinking of just selling the tires and axles as a temporary solution.

'78 Ford High Pinion D44 front axle
-New 4.56 gears
-New Warn hubs
-Chevy flattop knuckle conversion (still has 5x5.5 bolt)
-New Chevy stubshafts with new Spicer 760 ujoints
-Partsmike HiSteer arms
-New rotors
-New Chevy 1/2ton Brake calipers
-New Spicer balljoints
-Brackets setup for XJ/TJ/ZJ. Has swaybar mounts and everything. Trussed upper control arm mount over the diff bolts onto the diff for added strength. Spring pads cocked a little down but not an issue, no bad spring bow. Have spare stubshafts and u-joints. Already sold the Lockrite.

'78 Ford 9" 31 spline big bearing rear axle
-Detroit locker
-4.56 gears
-Brackets for 4-link long arms. Adjustable spring perches to dial out bow. All mounts are flush with the axle. Still has drum brakes and 1310 yoke to fit stock size driveshafts. Will throw on some swaybar mounts if you want. Because of the width its easy to disconnect a bar.

Both axles are 65" wide. The Chevy flattop conversion alone was around $1000 for all new parts. So Im asking $1200 for the front and $600 for the rear or $1700 for both. I'll throw in the 1-ton Inverted T steering for $200 more. Both axles have all new seals and bearings.

I have 5 37x12.5x15" MT/Rs on AR polished aluminum 5x5.5 rims that Ill sell if the axles go.

http://www.fototime.com/{B297683B-04B3-4515-BF85-D03A4A1C2C94}/picture.JPG

http://www.fototime.com/{425FA78B-B6F0-456C-883D-D253F68236D1}/picture.JPG

http://www.fototime.com/{4D67E428-1470-48BF-9A4A-65DC82B8360C}/picture.JPG

http://www.fototime.com/{5032542E-76E4-41F1-9D15-F8178BFC1337}/picture.JPG

Raacerx
02-27-2005, 09:46 PM
Oh, and I'll sell the front axle for considerably less with the stock Ford knuckles/brakes. Considerably. PM me.

happy
02-28-2005, 08:43 PM
can u run a stock suspension setup in the rear? or do u have to have long arms?

Raacerx
02-28-2005, 11:47 PM
can u run a stock suspension setup in the rear? or do u have to have long arms?

have to have long arms and 4-link. You can run a stock setup in the front though...

happy
03-01-2005, 08:31 PM
if u still have them for sale in 2 months let me know..lol

for me hopefully u will, but for u hopefully u won't.

Cue-Ball
03-01-2005, 08:55 PM
if u still have them for sale in 2 months let me know..lol

for me hopefully u will, but for u hopefully u won't.

He just might, he has been trying to sell his junk for months :lol: .

(no offense Max)

happy
03-02-2005, 01:47 AM
if u still have them for sale in 2 months let me know..lol

for me hopefully u will, but for u hopefully u won't.

He just might, he has been trying to sell his junk for months :lol: .

(no offense Max)

haha..yeah i know...right when he finished building it he puts it up for sale..krazy huh?

Raacerx
03-02-2005, 02:01 AM
if u still have them for sale in 2 months let me know..lol

for me hopefully u will, but for u hopefully u won't.

He just might, he has been trying to sell his junk for months :lol: .

(no offense Max)

Ive had plenty of interest in the axles, just havent decided whether Im going to seperate them or not. Selling them on here may be difficult but a quick ad on Pirate and the responses pour in...

Dont keep your hopes up. I have confidence either the Jeep or the axles will for sure be gone in the next 2 months.

Jcbzj
03-10-2005, 09:30 PM
What are you doin with your steering setup? I would be definately be interested if you're sellin it

Raacerx
03-10-2005, 10:51 PM
What are you doin with your steering setup? I would be definately be interested if you're sellin it

depends on what happens to the axles or the Jeep

Raacerx
03-16-2005, 10:57 PM
axles are spoken for. Im going to part the Jeep out though, so look for an ad in the next day or 2.