2drezq
01-22-2005, 02:34 PM
The OHC is from a ’94. Going into a 94 SE without the ATC module. The harness is from a 95 Laredo with a ATC module.
The OHC end is a 13 way connector. Viewed end-on it is numbered right to left top row (smaller) 1-6. Bottom row 7-13 Connections are listed as: OHC end-wire/stripe color-function-harness connection-wire color-function-correct connection. When correctly connected all wire colors match. Connection is to 100-WAY CONNECTOR which is labelled bottom to top connectors A-H. A-f are 14 point, H & G are 10-point, black and red respectively. They are the main connectors on the harness. No reference is given here to other connections (Remote door-locks, alarm, etc.)
1- rd/wt- power to lamps?- H4- rd/wt- fused bat A mem circuit- correct
2- db/rd- tail/lic/side - G7- or/vt- door B+ switch- B7
3- NO CONNECTION
4- vt/wt- fuel use trip- G5- db/rd- rf spkr ret. - B5
5- bl/og- chassis ground- G3- db/lb- mirror ret.- Grnd
6- lg/bk- eng/met switch- G1- yl/lg- rt mirror up/dn- B1
7- yl/dg- fused ing.- H10- yl/dg- fused ign conv. Items- correct
8- yl- ground- H3- yl- switched ground- correct
9- dg/rd- amb.temp. signal- separate 2-place connector- B11
10- lg/wt- amb.temp. return- separate 2-place connector- B10
11- wt/bk- serial bus B-- G9- rd/wt- fused batt A mem circuit- B9
12- vt/br- serial bus B+- G8- pk/vt- dr lock B+ unlock- B8
13- or- illum- G6- vt- rf spkr feed- B6
The OHC end is a 13 way connector. Viewed end-on it is numbered right to left top row (smaller) 1-6. Bottom row 7-13 Connections are listed as: OHC end-wire/stripe color-function-harness connection-wire color-function-correct connection. When correctly connected all wire colors match. Connection is to 100-WAY CONNECTOR which is labelled bottom to top connectors A-H. A-f are 14 point, H & G are 10-point, black and red respectively. They are the main connectors on the harness. No reference is given here to other connections (Remote door-locks, alarm, etc.)
1- rd/wt- power to lamps?- H4- rd/wt- fused bat A mem circuit- correct
2- db/rd- tail/lic/side - G7- or/vt- door B+ switch- B7
3- NO CONNECTION
4- vt/wt- fuel use trip- G5- db/rd- rf spkr ret. - B5
5- bl/og- chassis ground- G3- db/lb- mirror ret.- Grnd
6- lg/bk- eng/met switch- G1- yl/lg- rt mirror up/dn- B1
7- yl/dg- fused ing.- H10- yl/dg- fused ign conv. Items- correct
8- yl- ground- H3- yl- switched ground- correct
9- dg/rd- amb.temp. signal- separate 2-place connector- B11
10- lg/wt- amb.temp. return- separate 2-place connector- B10
11- wt/bk- serial bus B-- G9- rd/wt- fused batt A mem circuit- B9
12- vt/br- serial bus B+- G8- pk/vt- dr lock B+ unlock- B8
13- or- illum- G6- vt- rf spkr feed- B6