PDA

View Full Version : JKS BPE's didn't werk



5 Speed ZJ
01-19-2005, 03:26 PM
So I still have that loud clunk that you get when you hit bumps and The BPE's didn't work. What else could it be? Thanks.

Kraqa
01-19-2005, 03:30 PM
are all your front end bolts tight? could be BJ's.

5 Speed ZJ
01-19-2005, 03:39 PM
BJ's are good :P

(what are BJ's on ZJ's)

LouisianaZJ
01-19-2005, 03:45 PM
KillerBJ,

bj = ball joints

5 Speed ZJ
01-19-2005, 07:34 PM
Thanks asshole. I thought thats what they meant. :P

Jim311
01-20-2005, 12:58 AM
It's a lifted Jeep :shock:

ELLLLLIOTTTTT
01-20-2005, 01:12 AM
It's a lifted Jeep :shock:

exactly

it might have something to do that your steering geometry is completely outta whack, you've changed the entire suspension, and mainly because its your. Everything breaks on your rig! :lol:

OverkillZJ
01-20-2005, 01:30 AM
It's a lifted Jeep :shock:

Good point.... Infact, there's nothing useful in this post at all. Off to newbie tech it goes!

nathaniel
01-20-2005, 02:37 AM
Check frame side upper control arm bolt for tightness. Then check all the rest and the bushings condition

5 Speed ZJ
01-31-2005, 01:42 PM
When I am not feeling lazy, I will see if it does it without the shocks on. Then I will tighten the bolts if that doesn't work. I have heims at the frame side on the CA's though.

MaineZJ
01-31-2005, 02:18 PM
aren't heims known for making noise?

how's the 5speed swap going?

5 Speed ZJ
01-31-2005, 09:01 PM
They probobly are. Oh, the 5 speed has been in for like 3.5 months or so now haha.

Texas ZJ1
02-02-2005, 05:06 PM
I put mine on about three months ago and never heard the clunk. I also bubba tightened them.

Hunter