View Full Version : JKS BPE's didn't werk
5 Speed ZJ
01-19-2005, 03:26 PM
So I still have that loud clunk that you get when you hit bumps and The BPE's didn't work. What else could it be? Thanks.
Kraqa
01-19-2005, 03:30 PM
are all your front end bolts tight? could be BJ's.
5 Speed ZJ
01-19-2005, 03:39 PM
BJ's are good :P
(what are BJ's on ZJ's)
LouisianaZJ
01-19-2005, 03:45 PM
KillerBJ,
bj = ball joints
5 Speed ZJ
01-19-2005, 07:34 PM
Thanks asshole. I thought thats what they meant. :P
Jim311
01-20-2005, 12:58 AM
It's a lifted Jeep :shock:
ELLLLLIOTTTTT
01-20-2005, 01:12 AM
It's a lifted Jeep :shock:
exactly
it might have something to do that your steering geometry is completely outta whack, you've changed the entire suspension, and mainly because its your. Everything breaks on your rig! :lol:
OverkillZJ
01-20-2005, 01:30 AM
It's a lifted Jeep :shock:
Good point.... Infact, there's nothing useful in this post at all. Off to newbie tech it goes!
nathaniel
01-20-2005, 02:37 AM
Check frame side upper control arm bolt for tightness. Then check all the rest and the bushings condition
5 Speed ZJ
01-31-2005, 01:42 PM
When I am not feeling lazy, I will see if it does it without the shocks on. Then I will tighten the bolts if that doesn't work. I have heims at the frame side on the CA's though.
MaineZJ
01-31-2005, 02:18 PM
aren't heims known for making noise?
how's the 5speed swap going?
5 Speed ZJ
01-31-2005, 09:01 PM
They probobly are. Oh, the 5 speed has been in for like 3.5 months or so now haha.
Texas ZJ1
02-02-2005, 05:06 PM
I put mine on about three months ago and never heard the clunk. I also bubba tightened them.
Hunter
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.