PDA

View Full Version : WJ lift question



ZJustin94
01-12-2005, 11:25 PM
My dads friend has a WJ and was wondering if he could lift it 3.5". Is it possible to do a front to rear swap like on ZJs to obtain a 3" lift in the rear? I'm not too knowledgeable about WJ lifts so any help is appreciated. What all needs to be done when lifting a WJ 3-4"? Who makes 3-4" lift kits for WJs?


Thanks
Justin

Grand Taz
01-13-2005, 08:55 AM
Kevins offroad has a really good 4" lift kit for the WJ's. Its very well thought out. As far as the front to back spring swap, I haven't heard of anyone doing this as of yet.

JohnBoulderCO
01-13-2005, 10:46 PM
Can't do a front to rear swap, the rear spring's last coil is smaller in OD.

Kolak (Nick) also has a good hybrid 4.5" lift. You can PM him over on JU.

ZJustin94
01-14-2005, 11:36 AM
when do the WJs need an SYE? or is there even an sye that's made for the quadra drive tcase?


Justin

JohnBoulderCO
01-14-2005, 01:12 PM
when do the WJs need an SYE? or is there even an sye that's made for the quadra drive tcase?


Justin

I heard there is a company that has one out, (Halfdoc knows the name, he is on NAGCA), but I don't know anyone running one.
At 4" the stock drive shaft works.
I'm at 6" and have a CV (Double Cardon) at the transfer case output. Same yoke used as a 231 T-case to make the drive shaft. Tom Woods can make one for you.