gsh
08-10-2004, 01:48 AM
I'm gonna try to assemble a reference guide for TC swaps. We all know about the different length input shafts and spline count and gear cut change around '95.
Here's what I need from yunze:
The ID tag numbers,
The actual input shaft length (.75", .84", or 1.55" )
Tranny model
Engine
Vehicle year
donor vehicle model , tranny and year if known
Only report if you know the origin of the TC(s)
TIA
P.S. The reference guide is not gonna be just a listing of this info. I need this to confirm some other sources I'm finding.
Also if anybody knows the actual date of the change in the gearcut, that would help. Thought I saw a post on NAGCA before, but can't get a search narrowed enough to be useful.
If you don't have all the info above, contribute anyway. I just need to tie the tag codes to the measurements.
Here's what I need from yunze:
The ID tag numbers,
The actual input shaft length (.75", .84", or 1.55" )
Tranny model
Engine
Vehicle year
donor vehicle model , tranny and year if known
Only report if you know the origin of the TC(s)
TIA
P.S. The reference guide is not gonna be just a listing of this info. I need this to confirm some other sources I'm finding.
Also if anybody knows the actual date of the change in the gearcut, that would help. Thought I saw a post on NAGCA before, but can't get a search narrowed enough to be useful.
If you don't have all the info above, contribute anyway. I just need to tie the tag codes to the measurements.