PDA

View Full Version : Stupid but urgent Waggy 44 Hub question



ATL ZJ
07-30-2004, 07:24 PM
For some reason the guy I bought my Waggy 44 from who talks like he invented the axle thought it would be best to give me everything in eleventy billion pieces. Everything else has gone fine, but I've put the hubs on and got to wondering....

Does the hub body go inside the rotor and the wheelstuds press thru the inner hub flange and then the rotor, or vice versa. I even bought the Waggy Haynes, but it doesn't say and the pictures are too small to tell. It would make sense that the wheelstuds would press through the hub flange first so that the rotor would be removable, but the hub flange doesn't fit into the rotor that I have because there's a lip. There is about a 1" gap between the hub flange and inner rotor surface. Wrong rotors? Or does the hub body go entirely on the outside of the rotor?

FinlayZJ
07-31-2004, 03:55 PM
I left you a voicemail.

But this should answer your question.......

http://img.photobucket.com/albums/v296/FinlayZJ/HUB9.jpg

http://img.photobucket.com/albums/v296/FinlayZJ/HUB10.jpg

ATL ZJ
07-31-2004, 05:34 PM
Well good, that is what mine looks like. Except 6 lug.

ATL ZJ
08-02-2004, 12:51 AM
Well, got everything pretty much together. The splines on the outers were boogered so that the hub wouldn't go into the hub body until after I swapped on some spare outers. That further complicated things and may have had something to do with the confusion I had on this.

http://img.photobucket.com/albums/v125/atlzj/DCP_0453.jpg