PDA

View Full Version : radius arms



Stevo1
07-27-2004, 10:39 PM
Hey guys,
I decided to go with eb axles. But now my question is would you guys recomend just using the stock radius arms or cutting the ends off and adding a heim or some other type of joint for the frame end?
Also if anyone has pics or writeups on this please post.
Thanks
mike

Alaska ZJ
07-27-2004, 11:43 PM
Make them longer and use hiems


To tell you the truth though EB axles suck. The joints are small, the D44 is a low pinion, the 9" rear is small bearing and possibly 28 spline.

Look for a set of axles out of a F150 or the like. You will be much happier.

Stevo1
07-28-2004, 10:19 AM
Im going to find the 9 inch with big bearing 31 spline and you can swap in bigger joints in the front 44. Also i have this s my daily driver in CA, so i would have a hard time trying to pass the Cops with ful widths.
Mike

BigDaveZJ
07-28-2004, 10:31 AM
i would have a hard time trying to pass the Cops with ful widths.
Mike

Just get the proper backspaced rims and you can barely tell they're fullwidth.