PDA

View Full Version : U Joint Question..



Peak ZJ
07-09-2004, 12:20 AM
94 ZJ, 2wd. The Driveshaft Ujoint on the T-case side, where the slip yoke. I need a part number. The U Joint is the same length on both sides, but the center is cut down more on one side. Any Ideas? It is like the 1310, but the center part is different.....

Let me know..

ATL ZJ
07-09-2004, 01:25 AM
Hmm... I thought was the same as the one on the 4wd shaft. I have an old rear driveshaft from back when my ZJ was 2wd that you could have that U-joint from when I come to pick up the parts from you. Or you could take the whole shaft too, I'd love to get rid of it. Not sure of the part number. I know that's what you're really looking for.

Alaska ZJ
07-09-2004, 10:15 AM
I searched Napa online and there is only one Ujoint for all Grand Cherokee's So I will betcha that it is just a funky Jap Crap 1310 joint.

Let us know for sure.

luvthejeep
07-10-2004, 11:01 AM
maybe lost a zerk fitting?

Peak ZJ
07-12-2004, 11:39 PM
It has a spicer cast number... No Jap crap. The Joint is the same length both ways, it's the center section that is narrow...

nathan
07-13-2004, 12:36 AM
if it is the same size as a 1310 just throw one in there, it will self clearence :D

edit- isn't this a ju question? :P :P

Peak ZJ
07-13-2004, 12:39 AM
The center is narrow on two sides.. I'll take a pic tomorrow at work and show you what I meanh

robselina
07-13-2004, 10:45 PM
only two things that matter with a u-joint, their overall length (cap to cap) and the cap diamteter. How exactly the cross-shaft is cast, forged or whatever doesn't really matter (in terms of slapping it in there and making it work I mean)

Peak ZJ
07-14-2004, 12:01 AM
I hear what your saying, and I'm not new to the makeup of Ujoints... But, a 1310, which should fit, won't fit through the ears on the yoke...