PDA

View Full Version : well built dana 44



Arsonist_Bob
10-15-2011, 01:06 PM
Sorry, please feel free to move this. Newb move, didnt mean to post in vehicles being parted out.


the title says it really. ive got a fairly well built 44 that i was gonna put under my wj but i have an opportnity to pick up a 60 for a good price, granted i can sell this thing. anyways here is what all i have into it.


Wagoneer 44 LP (originally 61.5 wms) sitting at 63 wms with the chevy 8 lug hubs
brand new bearings through out the whole axle
new warn premium lockouts (never run)
chevy 8 lug hubs 3/4ton - from junkyard but they are in very good condition (new bearings and seals installed)
NEW calipers and pads
Reid Racing knuckles (chevy of course)
new and installed dana spicer ball joints
3 bolt high steer arms (installed)
4 chevy one ton TREs setup for full crossover (installed)
1.5" .250 wall DOM for tie rod (installed and toe set with about 3 threads exposed on each end)
4.56 Precision Gear strapped to an Auburn Posi (professionally setup with a new master install kit)
stock shafts and ujoints with a set of spare stub shafts(pretty much the only thing i havent bought aftermarket yet)
axle is stripped down to the tubes and ready for brackets to be installed

heres a picture in a less complete form. just so you can get an idea
http://imageshack.us/photo/my-images/850/photo0060k.jpg/

with all the time and parts i've got wrapped in this sucker i know i wont get everything out of it that i put in but I'm hoping to sell this for about
$2300 but willing to work on that a little