PDA

View Full Version : Monster Motor Mounts - Ironman



IronmanAndy
04-14-2011, 01:51 PM
If you're looking to wake up your tired old motor mounts these will change the way your jeeps drives! With all of the torque offered from the Jeep 4.0 engine these mounts help send that torque to the ground. No more floppy shifters and sloppy acceleration! Don't over-pay for weaker parts! These are guaranteed to never break or let you down! These are the toughest motor mounts available for the Jeep 4.0 inline 6 engine in the industry.

Check them out here --> www.Ironman4x4Fab.com


http://www.cherokeeforum.com/attachments/f10/44704d1302802733t-monster-motor-mounts-ironman-monstermountsfinalweb.jpg

merlin
04-14-2011, 01:56 PM
No mounts for WJ 4.7 engine?

dp96zj
04-14-2011, 03:34 PM
EDIT: Nevermind, just saw that they weren't for Grand Cherokees. They do look solid though.


FYI, you may want to check your advertisement for typographical errors.

IronmanAndy
04-14-2011, 05:10 PM
what you don't like drive lilnes?? Thanks for the notice

SirFuego
04-14-2011, 05:16 PM
While we're at it, exclusive is spelled incorrectly, too.

"Suspension" is spelled incorrectly on your control arm ad in the other thread.

IronmanAndy
04-14-2011, 05:50 PM
If only Adobe Photoshop and Illustrator had a spell check like Mallcrawlin... I'll start checking the write-ups more carefully next time. Thanks

IronmanAndy
04-14-2011, 05:51 PM
And SirFuego your avatar is moving damnit!

biggoofy
04-14-2011, 07:33 PM
So your selling mounts for everything but a Grand on a GC specific site?

autowizard
04-14-2011, 08:25 PM
Somebody needs to step up and make those style of mounts for the ZJ with the 4.0

IronmanAndy
04-14-2011, 10:25 PM
we are working on that now!!! I completely agree. Ya gotta start somewhere.
Andy

96RedZJ
04-14-2011, 11:02 PM
we are working on that now!!! I completely agree. Ya gotta start somewhere.
Andy

Yea.. start with gc products :)

Sent from my DROIDX

IronmanAndy
04-14-2011, 11:35 PM
We do. I have 22 individual setups and combinations of control arms and track bars. http://www.ironman4x4fab.com/ZJ_Inventory.html

Control arms are our bread and butter. That is our main product. We are also a vendor on about 10 other forums and make parts for XJ's TJ's MJ's ZJ's WJ's YJ's and JK's. A lot of the control arms are cross over parts. We have found that it is better to master what we are good at and then slowly grow from there. I would rather sell 20 excellent products than 100-200 Ok to crap products. We focus more on quality and customer service than quantity. Leave the high volume product lines and crap customer service to the big guys. I encourage everyone to research what our buyers say about us before you buy anything. We are a friendly, customer oriented company. If you call us I will answer and will be happy to talk to anyone about any problems, wobbles, concerns or curiosities you may have. I am always happy to do so whether you are a customer or not.
Thanks for the opportunity to be a part of this community!
Andy Carter 704 796 3502

merlin
04-25-2011, 09:29 PM
Somebody needs to step up and make those style of mounts for the ZJ with the 4.0

WJ with 4.7 as well please.

IronmanAndy
04-25-2011, 10:00 PM
We currently are working with crawler ready to take over his line or a similar part for the ZJ 5.2 motor mounts. We also are planning the 4.0 and the 5.9 mounts . We hope to drop these all at once. We will pursue the WJ mounts after that.
Andy

zjrog
05-06-2011, 05:42 AM
Looking forward to it. Or I'll just have to fab my own like I did for my Ford Ranger 2.3...
http://i178.photobucket.com/albums/w271/zjrog/Warthog%20Rising/Motor%20Mounts/Hogmounts028.jpg
http://i178.photobucket.com/albums/w271/zjrog/Warthog%20Rising/Motor%20Mounts/Hogmounts029.jpg
Perhaps overkill, but I couldn't see replacing the stock ones again (2times in less than 3 years), and these at least will keep the motor from flopping around... My welding is getting better...