PDA

View Full Version : Parting out 98 ZJ 4.0



O'Tool
08-01-2010, 03:52 PM
Hey guys!
I have a 98 ZJ with the 4.0 engine being parted out.
The ECU is fried, and I'm moving the Clayton's stuff over to my new 5.9, so some things will be spoken for, but most of the normal stuff will be available.
Gimme a shout over PM, or email what you guys are looking for if anything.
Thanks,
Aaron

Ok the specs:
I am moving the 231 over to the 5.9, so I'll have the stock Xfer case available.
Also moving the HP30 and the 8.8 with the lockers and 4.56s to the 5.9, so I'll have the stock 5.9 axles available.
The 4.0 has about 114K max on it.
The Transmission is fine, never slipped.
also, the bullbar and the steel rear bumper will go over to the 5.9, so I'll have tkhe stock 5.9 bumpers available too.
Here's the kicker though... the 5.9 is a custom paint job, so the limited bumpers are a deep metallic blue.
rear wiper doesn't work on the 4.0 so that's out.
anything else, lemme know!