PDA

View Full Version : GSSE Oh-10 Swap Meet



SirFuego
07-22-2010, 10:27 AM
Need to sell something or hoping to save on shipping by getting something directly from a MC member going to Harlan this year? Post up!!

Here is what I have:

- Worn and grooved 36x13.5x15 Irok mounted on a 15x8 aluminum rim (not sure of the brand) with 3.75" backspacing and 5 on 4.5" bolt pattern. The Irok still holds air -- $20

- D30 unit bearings (they may or may not fit your D30). I got these from Cue-Ball last year as spares and didn't realize that there were different style unit bearings on D30s -- and these were the wrong style. My front axle is out of a 96XJ, so these won't work with any D30 that uses the same unit bearings as that. I was told that they will work with YJ's, but I can't confirm the validity of that. I unfortunately can't tell you any more than that, so you'll have to do some research to find out if they will fit or not. Just looking to get back what I have into them -- $50

I also have various grey interior parts from around the dash/center console of a 93ZJ. Can't guarantee the condition of anything though. Let me know what you need and I'll see if I haven't thrown it away yet.

rstrucks
07-22-2010, 11:12 AM
I failed miserably at any swap meet type activity at GSSE-W. I do have some parts I'd like to sell though. I'll get a list together later tonight.

ATL ZJ
07-22-2010, 11:34 AM
I still have everything I posted in the GSSE-W thread. 30 spline 60 outers, 1350 driveshaft female slip yokes, 1310 to 1350 conversion joints, etc. And one (new) VDO mech. temp gauge.

FMV on any of it, so if you want it just tell me I need to throw it in the truck.

Pearce
07-22-2010, 02:17 PM
YJ steering box tapped for hydro assist with the Northern Tool ram and hoses attached. If you want it, we'll work on a fair price.

S-10 Seanzy
07-22-2010, 03:49 PM
I still have everything I posted in the GSSE-W thread. 30 spline 60 outers, 1350 driveshaft female slip yokes, 1310 to 1350 conversion joints, etc. And one (new) VDO mech. temp gauge.

FMV on any of it, so if you want it just tell me I need to throw it in the truck.

Cam, I could probably use one of those 1350 female slips if the price is right. I fucked one up on my spare Superduty shaft when I got too liberal with a BFH. How much do you want for it?

ATL ZJ
07-22-2010, 04:04 PM
Cam, I could probably use one of those 1350 female slips if the price is right. I fucked one up on my spare Superduty shaft when I got too liberal with a BFH. How much do you want for it?

maybe half of what they go for new, whatever that is... they're in decent shape and would be great with a little cleaning up

slim616
07-22-2010, 09:15 PM
If anyone needs some sort of stock parts let me know.

rstrucks
07-22-2010, 11:36 PM
- 5 black steel wheels. 17x9, 5 on 4.5". Good shape other than light rock rash.
- YJ front bumper. Powder coated, 3/16ths steel, good condition, Rusty's brand.
- Bushwacker fender flares for a TJ.
- ARB air locker for out of my old high pinion, 30 spline, Rock Jock 60 that has 4.56 gears. Not sure what model number it is though..... RD21 maybe?
- Solid brand Dana 60 ball joint inner C's. New.
- Dana 30 unit bearings. Used.
- WJ brake swap parts. Akebono calipers, redrilled WJ rotors, knuckles drilled out for rod ends (could use tapered inserts if you want to run TRE's) and with the unit bearing spacers welded on.
- 36x13.50x15 IROK (1) Like new condition. ~ 95% tread.
- BFG KM2 MT's (5) 315/75/16 Really good shape. Used for about 8K miles. I'll try to get a tread measurement and add to the post. They are mounted on 16x8 black steelies in really nice shape.

Not sure about pricing but it'll be fair market value or less. Let me know if you're interested and we'll try to work something out.

UTChavok
07-23-2010, 08:47 AM
- 5 black steel wheels. 17x9, 5 on 4.5". Good shape other than light rock rash.
- YJ front bumper. Powder coated, 3/16ths steel, good condition, Rusty's brand.
- Bushwacker fender flares for a TJ.
- ARB air locker for out of my old high pinion, 30 spline, Rock Jock 60 that has 4.56 gears. Not sure what model number it is though..... RD21 maybe?
- Solid brand Dana 60 ball joint inner C's. New.
- Dana 30 unit bearings. Used.
- WJ brake swap parts. Akebono calipers, redrilled WJ rotors, knuckles drilled out for rod ends (could use tapered inserts if you want to run TRE's) and with the unit bearing spacers welded on.
- 36x15.50x15 IROK (1) Like new condition. ~ 95% tread.
- BFG KM2 MT's (5) 315/75/16 Really good shape. Used for about 8K miles. I'll try to get a tread measurement and add to the post. They are mounted on 16x8 black steelies in really nice shape.

Not sure about pricing but it'll be fair market value or less. Let me know if you're interested and we'll try to work something out.


Have a financing plan for the KM2s? :D

SirFuego
07-23-2010, 09:12 AM
- Dana 30 unit bearings. Used.

How much? Do you know what year/model D30 they came out of? If you don't know, can you bring them with you so I can compare them to my current spare set of unit bearings that don't work for me? If they are different, I'd be interested in buying them or trading my D30 unit bearings for them.

Also, is the width on your Irok listing correct?

rstrucks
07-23-2010, 09:34 AM
Have a financing plan for the KM2s? :D

Layaway!


How much? Do you know what year/model D30 they came out of? If you don't know, can you bring them with you so I can compare them to my current spare set of unit bearings that don't work for me? If they are different, I'd be interested in buying them or trading my D30 unit bearings for them.

Also, is the width on your Irok listing correct?

I have a few UB's. I'll have to look to see which ones I still have left as I gave my brother a couple. They probably came off my ZJ. I think I may have some XJ and/or YJ UB's as well. I'll bring 'em up with me.

IROK - doh! Good catch, thanks. It's a 36x13.50x15.

BigClay
07-23-2010, 09:50 AM
I have a completely rebuilt hydraulic ram I was going to use for steering assist, but decided not to. It has all the lines with it, and I can throw in a spare steering box as well. I am not planning on bringing it unless someone really wants it. PM me and we can talk about price.

StinkoMan20X6_
07-25-2010, 01:54 AM
I've got 4 37" IROK's for a 16.5" wheel that I've beat on for a few years but they still have tons of tread and all hold air. Never been punctured or patched.

indy242003
07-26-2010, 04:04 PM
I've got a set of F150 outers, Stock WJ Wheels, 2" rear coil spacers, Some coil over springs 14" (have to check wieghts). Dana 60 rear stock. I'll add more when I think about it.